PublicCodeMirror/OrcaSlicer-bambulab
1
0
Fork 0
mirror of https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git synced 2026-05-14 13:02:39 -07:00
Code Issues Packages Projects Releases Wiki Activity

Slic3r has been modified to propagate the following filament specific

Browse Source 
values to GCode generator, one per active extruder:

bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time

Now it remains to extend Slic3r to correctly apply these values.
This commit is contained in:
bubnikv
2017-06-21 16:15:39 +02:00
parent 0bd2bb1e8e
commit f0325575c2
16 changed files with 180 additions and 135 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
t/skirt_brim.t
View File

@@ -18,7 +18,7 @@ use Slic3r::Test;
$config->set('skirt_height', 2);
$config->set('perimeters', 0);
$config->set('support_material_speed', 99);
$config->set('cooling', 0); # to prevent speeds to be altered
$config->set('cooling', [ 0 ]); # to prevent speeds to be altered
$config->set('first_layer_speed', '100%'); # to prevent speeds to be altered
my $test = sub {
@@ -52,7 +52,7 @@ use Slic3r::Test;
$config->set('bottom_solid_layers', 0); # to prevent solid shells and their speeds
$config->set('brim_width', 5);
$config->set('support_material_speed', 99);
$config->set('cooling', 0); # to prevent speeds to be altered
$config->set('cooling', [ 0 ]); # to prevent speeds to be altered
$config->set('first_layer_speed', '100%'); # to prevent speeds to be altered
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
@@ -97,7 +97,7 @@ use Slic3r::Test;
$config->set('support_material_speed', 99);
$config->set('perimeter_extruder', 1);
$config->set('support_material_extruder', 2);
$config->set('cooling', 0); # to prevent speeds to be altered
$config->set('cooling', [ 0 ]); # to prevent speeds to be altered
$config->set('first_layer_speed', '100%'); # to prevent speeds to be altered
my $print = Slic3r::Test::init_print('overhang', config => $config);