Initial release

resources/profiles/iQ/process/0.20mm Standard @iQ TiQ2 P1 - HPP4GF25 Grauts (0.4 Nozzle).json

@@ -0,0 +1,67 @@
+{
+    "type": "process",
+    "name": "0.20mm Standard @iQ TiQ2 P1 - HPP4GF25 Grauts (0.4 Nozzle)",
+    "inherits": "fdm_process_tiq_common",
+    "from": "system",
+    "instantiation": "true",
+    "default_acceleration": "1500",
+    "enable_extra_bridge_layer": "apply_to_all",
+    "enable_prime_tower": "1",
+    "initial_layer_infill_speed": "100",
+    "inner_wall_acceleration": "1500",
+    "inner_wall_speed": "100",
+    "notes": "Pre-Select:     FBA Time Delay: 0    EPC Factor: 0\n\nDeutsch P1 HPP4GF25\n\n1.   Überprüfen Sie, dass sich das Grauts HPP4GF25 im linken Extruder befindet. Halten Sie das Filament trocken! Detailierte Trocknungsanleitung, siehe unten.\n\n2.   Überprüfen Sie, dass sich eine 0,4 mm Wolfram-Kupfer Düse im linken Extruder befindet.\n\n3.   Verwenden Sie Magigoo Kleber für PPGF auf der PET-Folie, um eine bessere Haftung zu gewährleisten, im Singledruck in der Regel auf PET-Folie nicht erforderlich.\n\n4.   Reinigen Sie ggf. die Düse mit einer Messing-Drahtbürste.\nNun sind sie bereit, um Ihren Druck zu starten.\n\n\nTipp: Am besten lässt sich das Bauteil bei einer Druckplattentemperatur von 80°C entfernen, da dann der Kleber weich wird.\n\n\nEnglish P1 HPP4GF25\n\n1.   Check Left extruder filament: Grauts HPP4GF25 - Keep the filament dry!! Detailed drying instruction below.\n\n2.   Check left extruder nozzle: 0.4mm Wolfram\n\n3.   Check bed: PET with Magigoo glue for PPGF\n\n4.   Check nozzle: Clean it with brush\n\nWELLDONE! YOU ARE READY NOW TO START YOUR PRINT JOB!\n\n\nTip: The component is best removed at a printing plate temperature of 80°C, as this softens the adhesive.",
+    "outer_wall_acceleration": "1500",
+    "outer_wall_speed": "80",
+    "print_settings_id": "0.20mm Standard @iQ TiQ2 P1 - HPP4GF25 Grauts (0.4 Nozzle)",
+    "sparse_infill_speed": "100",
+    "support_angle": "0",
+    "support_base_pattern": "default",
+    "support_interface_bottom_layers": "0",
+    "support_interface_top_layers": "3",
+    "support_object_first_layer_gap": "0.3",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_speed": "100",
+    "support_style": "snug",
+    "support_top_z_distance": "0.2",
+    "support_type": "normal(auto)",
+    "top_surface_acceleration": "1500",
+    "top_surface_speed": "80",
+    "travel_acceleration": "1500",
+    "bridge_flow": "1.07",
+    "bridge_speed": "25",
+    "brim_type": "no_brim",
+    "enable_support": "1",
+    "exclude_object": "0",
+    "gcode_label_objects": "0",
+    "compatible_printers": [
+        "iQ TiQ2 0.4 Nozzle"
+    ],
+    "internal_bridge_speed": "50%",
+    "internal_solid_infill_speed": "60",
+    "ironing_pattern": "concentric",
+    "prime_tower_width": "80",
+    "layer_height": "0.2",
+    "reduce_crossing_wall": "1",
+    "skirt_height": "1",
+    "skirt_loops": "2",
+    "small_perimeter_speed": "30%",
+    "small_perimeter_threshold": "5",
+    "sparse_infill_density": "30%",
+    "sparse_infill_pattern": "triangles",
+    "support_base_pattern_spacing": "1",
+    "support_bottom_interface_spacing": "0.3",
+    "support_bottom_z_distance": "0.24",
+    "support_expansion": "0.5",
+    "support_filament": "1",
+    "support_interface_filament": "1",
+    "support_interface_pattern": "rectilinear_interlaced",
+    "support_interface_spacing": "0",
+    "top_shell_thickness": "0",
+    "top_solid_infill_flow_ratio": "0.98",
+    "tree_support_branch_diameter_angle": "10",
+    "tree_support_branch_diameter_organic": "3",
+    "tree_support_tip_diameter": "2",
+    "wall_loops": "2"
+}