Initial release

resources/profiles/UltiMaker/machine/UltiMaker 2 0.4 nozzle.json

@@ -0,0 +1,115 @@
+{
+    "type": "machine",
+    "name": "UltiMaker 2 0.4 nozzle",
+    "inherits": "fdm_machine_common",
+    "from": "system",
+    "setting_id": "GM001",
+    "instantiation": "true",
+    "printer_model": "UltiMaker 2",
+    "default_print_profile": "0.18mm Standard @UltiMaker 2",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printable_area": [
+        "0x0",
+        "224x0",
+        "224x225",
+        "0x225"
+    ],
+    "printable_height": "212",
+    "nozzle_type": "undefine",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_extruding": [
+        "1500",
+        "1500"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1500",
+        "1500"
+    ],
+    "machine_max_acceleration_travel": [
+        "3000",
+        "3000"
+    ],
+    "machine_max_acceleration_x": [
+        "3000",
+        "3000"
+    ],
+    "machine_max_acceleration_y": [
+        "3000",
+        "3000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "120",
+        "120"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Qidi",
+    "retraction_minimum_travel": [
+        "5"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retraction_length": [
+        "4.5"
+    ],
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retraction_speed": [
+        "35"
+    ],
+    "deretraction_speed": [
+        "0"
+    ],
+    "wipe_distance": [
+        "0.2"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "machine_pause_gcode": "M0",
+    "default_filament_profile": [
+        "Generic PLA @System"
+    ],
+    "machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[bed_temperature_initial_layer_single]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[bed_temperature_initial_layer_single]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header",
+    "machine_end_gcode": "; # # # # # # START Footer\nG91; relative coordinates\n;G1 E-1 F1200; retract the filament\nG1 Z+15  X-10 Y-10 E-7  F6000; move Z a bit\n; G1 X-10 Y-10 F6000; move XY a bit\nG1 E-5.5 F300; retract the filament\nG28 X0 Y0; move X/Y to min endstops, so the head is out of the way\nM104 S0; extruder heater off\nM140 S0; heated bed heater off (if you have it)\nM84; disable motors\n; # # # # # # END Footer\n",
+    "scan_first_layer": "0"
+}

resources/profiles/UltiMaker/machine/UltiMaker 2.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "UltiMaker 2",
+    "model_id": "UltiMaker-2",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "UltiMaker",
+    "bed_model": "ultimaker_2_buildplate_model.stl",
+    "bed_texture": "ultimaker_2_buildplate_texture.png",
+    "hotend_model": "ultimaker_hotend.stl",
+    "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
+}

resources/profiles/UltiMaker/machine/fdm_machine_common.json

@@ -0,0 +1,118 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "printer_technology": "FFF",
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "gcode_flavor": "marlin",
+    "silent_mode": "0",
+    "machine_max_acceleration_e": [
+        "10000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "1500"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1500"
+    ],
+    "machine_max_acceleration_x": [
+        "3000"
+    ],
+    "machine_max_acceleration_y": [
+        "3000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "120"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "12"
+    ],
+    "machine_max_jerk_e": [
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.07"
+    ],
+    "printable_height": "212",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "6"
+    ],
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "50"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "wipe": [
+        "1"
+    ],
+    "z_lift_type": "NormalLift",
+    "default_print_profile": "",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_start_gcode": "",
+    "machine_end_gcode": ""
+}

resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json

@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "name": "0.12mm Fine @UltiMaker 2",
+    "inherits": "fdm_process_common",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "adaptive_layer_height": "1",
+    "reduce_crossing_wall": "0",
+    "layer_height": "0.12",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "6",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "60",
+    "brim_width": "0",
+    "brim_object_gap": "0",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "0",
+    "top_surface_acceleration": "0",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.45",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "0",
+    "inner_wall_acceleration": "0",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.3",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "35%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "3",
+    "skirt_height": "1",
+    "skirt_loops": "2",
+    "minimum_sparse_infill_area": "10",
+    "internal_solid_infill_line_width": "0",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "grid",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "3",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_spacing": "0.2",
+    "support_interface_speed": "100%",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_speed": "60",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "50%",
+    "tree_support_branch_angle": "40",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "1",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "7",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "35%",
+    "initial_layer_infill_speed": "35%",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_speed": "250",
+    "top_surface_speed": "200",
+    "gap_infill_speed": "250",
+    "sparse_infill_speed": "270",
+    "travel_speed": "150",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "compatible_printers": [
+        "UltiMaker 2 0.4 nozzle"
+    ]
+}

resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json

@@ -0,0 +1,109 @@
+{
+    "type": "process",
+    "name": "0.18mm Standard @UltiMaker 2",
+    "inherits": "fdm_process_common",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "adaptive_layer_height": "1",
+    "reduce_crossing_wall": "0",
+    "layer_height": "0.18",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0.8",
+    "bridge_flow": "1",
+    "bridge_speed": "60",
+    "brim_width": "0",
+    "brim_object_gap": "0",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "0",
+    "top_surface_acceleration": "0",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.45",
+    "infill_direction": "45",
+    "sparse_infill_density": "20%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "0",
+    "inner_wall_acceleration": "0",
+    "initial_layer_line_width": "0.45",
+    "initial_layer_print_height": "0.25",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.5",
+    "infill_wall_overlap": "35%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "3",
+    "skirt_height": "1",
+    "skirt_loops": "2",
+    "minimum_sparse_infill_area": "10",
+    "internal_solid_infill_line_width": "0.45",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "grid",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.45",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "3",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_spacing": "0.2",
+    "support_interface_speed": "100%",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_speed": "45",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "50%",
+    "tree_support_branch_angle": "40",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "1",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "15",
+    "initial_layer_infill_speed": "30",
+    "initial_layer_travel_speed": "60",
+    "outer_wall_speed": "30",
+    "inner_wall_speed": "40",
+    "internal_solid_infill_speed": "40",
+    "top_surface_speed": "15",
+    "gap_infill_speed": "20",
+    "sparse_infill_speed": "40",
+    "travel_speed": "120",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "compatible_printers": [
+        "UltiMaker 2 0.4 nozzle"
+    ]
+}

resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json

@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "name": "0.25mm Draft @UltiMaker 2",
+    "inherits": "fdm_process_common",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "adaptive_layer_height": "1",
+    "reduce_crossing_wall": "0",
+    "layer_height": "0.25",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "60",
+    "brim_width": "0",
+    "brim_object_gap": "0",
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "0",
+    "top_surface_acceleration": "0",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "outer_wall_line_width": "0.4",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.45",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_acceleration": "500",
+    "travel_acceleration": "0",
+    "inner_wall_acceleration": "0",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.3",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "35%",
+    "interface_shells": "0",
+    "ironing_flow": "15%",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "10",
+    "inner_wall_line_width": "0.45",
+    "wall_loops": "2",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "3",
+    "skirt_height": "1",
+    "skirt_loops": "2",
+    "minimum_sparse_infill_area": "10",
+    "internal_solid_infill_line_width": "0",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "grid",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "3",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_spacing": "0.2",
+    "support_interface_speed": "100%",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_speed": "60",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "50%",
+    "tree_support_branch_angle": "40",
+    "tree_support_wall_count": "0",
+    "detect_thin_wall": "1",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.4",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "initial_layer_speed": "35%",
+    "initial_layer_infill_speed": "35%",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_speed": "250",
+    "top_surface_speed": "200",
+    "gap_infill_speed": "250",
+    "sparse_infill_speed": "270",
+    "travel_speed": "150",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "compatible_printers": [
+        "UltiMaker 2 0.4 nozzle"
+    ]
+}

resources/profiles/UltiMaker/process/fdm_process_common.json

@@ -0,0 +1,70 @@
+{
+    "type": "process",
+    "name": "fdm_process_common",
+    "from": "system",
+    "instantiation": "false",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "compatible_printers": [],
+    "print_sequence": "by layer",
+    "default_acceleration": "0",
+    "bridge_no_support": "0",
+    "elefant_foot_compensation": "0.1",
+    "outer_wall_line_width": "0.4",
+    "outer_wall_speed": "120",
+    "line_width": "0.45",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "20",
+    "gap_infill_speed": "30",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "25%",
+    "sparse_infill_speed": "50",
+    "interface_shells": "0",
+    "detect_overhang_wall": "0",
+    "reduce_infill_retraction": "0",
+    "filename_format": "{input_filename_base}.gcode",
+    "wall_loops": "3",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "40",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "nearest",
+    "skirt_distance": "2",
+    "skirt_height": "2",
+    "minimum_sparse_infill_area": "0",
+    "internal_solid_infill_line_width": "0.45",
+    "internal_solid_infill_speed": "40",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_filament": "0",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.15",
+    "support_interface_loop_pattern": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_spacing": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2",
+    "support_speed": "40",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.5",
+    "detect_thin_wall": "0",
+    "top_surface_line_width": "0.4",
+    "top_surface_speed": "30",
+    "travel_speed": "400",
+    "enable_prime_tower": "1",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0"
+}