Initial release

resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json

@@ -0,0 +1,133 @@
+{
+    "type": "machine",
+    "name": "MM slb 0.4 nozzle",
+    "inherits": "fdm_machine_common",
+    "from": "system",
+    "setting_id": "GM001",
+    "instantiation": "true",
+    "printer_model": "MM slb",
+    "default_print_profile": "0.10mm Fine @MM slb",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printable_area": [
+        "0x0",
+        "125x0",
+        "125x125",
+        "0x125"
+    ],
+    "printable_height": "160",
+    "auxiliary_fan": "0",
+    "machine_max_acceleration_travel": [
+        "3000",
+        "3000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_z": [
+        "5",
+        "5"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "printer_settings_id": "MM",
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "wipe_distance": [
+        "1"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "scan_first_layer": "0",
+    "cooling_tube_length": "20",
+    "cooling_tube_retraction": "60",
+    "extruder_clearance_height_to_lid": "100",
+    "extruder_clearance_height_to_rod": "32",
+    "extruder_clearance_radius": "50",
+    "machine_max_acceleration_e": [
+        "4000"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "120"
+    ],
+    "machine_pause_gcode": "M601",
+    "min_layer_height": [
+        "0.1"
+    ],
+    "nozzle_type": "brass",
+    "parking_pos_retraction": "22",
+    "retract_length_toolchange": [
+        "5"
+    ],
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "9",
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "9",
+        "20"
+    ],
+    "thumbnails": [
+        "125x125"
+    ],
+    "deretraction_speed": [
+        "25"
+    ],
+    "machine_max_acceleration_extruding": [
+        "2000",
+        "1500"
+    ],
+    "machine_max_acceleration_retracting": [
+        "2000",
+        "1500"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "0.4"
+    ],
+    "machine_max_speed_x": [
+        "200",
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "200",
+        "500"
+    ],
+    "retraction_length": [
+        "2"
+    ],
+    "retraction_speed": [
+        "25"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "default_filament_profile": [
+        "Generic PLA @System"
+    ],
+    "machine_max_acceleration_x": [
+        "2000",
+        "3000"
+    ],
+    "machine_max_acceleration_y": [
+        "2000",
+        "3000"
+    ],
+    "machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n;G29\nG0 Z5 F300\nG1 X0 Y50 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E10\nG1 F1000 X50 E18\nG92 E0\nM117 Printing...",
+    "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 \nM83\nG1 E-1 F600  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z1 F600\nG90 ;absolute positioning\nG1 X0 Y120 F6000\nG1 E-4 F1200\nM107 ; turn off fan\nM84 ;steppers off\nPRINT_END",
+    "z_hop_types": [
+        "Slope Lift"
+    ]
+}