mirror of
https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git
synced 2026-05-14 06:53:47 -07:00
Initial release
This commit is contained in:
Jake
BIN
resources/profiles/MagicMaker/120_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/120_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/125_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/125_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/150_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/150_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/160_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/160_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/220210_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/220210_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/220_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/220_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/250_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/250_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/310_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/310_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/MM BoneKing_cover.png
Normal file
BIN
resources/profiles/MagicMaker/MM BoneKing_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 12 KiB |
BIN
resources/profiles/MagicMaker/MM hj SK_cover.png
Normal file
BIN
resources/profiles/MagicMaker/MM hj SK_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 12 KiB |
BIN
resources/profiles/MagicMaker/MM hj_buildplate_model.stl
Normal file
BIN
resources/profiles/MagicMaker/MM hj_buildplate_model.stl
Normal file
Binary file not shown.
BIN
resources/profiles/MagicMaker/MM hqs SF_cover.png
Normal file
BIN
resources/profiles/MagicMaker/MM hqs SF_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 11 KiB |
BIN
resources/profiles/MagicMaker/MM hqs hj_cover.png
Normal file
BIN
resources/profiles/MagicMaker/MM hqs hj_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 12 KiB |
BIN
resources/profiles/MagicMaker/MM slb_cover.png
Normal file
BIN
resources/profiles/MagicMaker/MM slb_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 9.3 KiB |
BIN
resources/profiles/MagicMaker/MM_buildplate_texture.png
Normal file
BIN
resources/profiles/MagicMaker/MM_buildplate_texture.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 7.6 KiB |
49
resources/profiles/MagicMaker/filament/MM Generic PEEK.json
Normal file
49
resources/profiles/MagicMaker/filament/MM Generic PEEK.json
Normal file
@@ -0,0 +1,49 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "MM Generic PEEK",
|
||||
"inherits": "fdm_filament_peek",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"1000"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"5"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"420"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"420"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"460"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"380"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"340"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"MM hj SK 0.4 nozzle",
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_peek",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"PEEK"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,134 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MM BoneKing 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "MM BoneKing",
|
||||
"default_print_profile": "0.10mm Fine @MM BoneKing",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printable_height": "300",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_settings_id": "MM",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"cooling_tube_length": "20",
|
||||
"cooling_tube_retraction": "60",
|
||||
"extruder_clearance_height_to_lid": "100",
|
||||
"extruder_clearance_height_to_rod": "32",
|
||||
"extruder_clearance_radius": "50",
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"nozzle_type": "brass",
|
||||
"parking_pos_retraction": "22",
|
||||
"retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"MM Generic PLA"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"10000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"100000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"100000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.5",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"310x0",
|
||||
"310x306",
|
||||
"0x306"
|
||||
],
|
||||
"thumbnails": [
|
||||
"310x310"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END",
|
||||
"machine_max_speed_e": [
|
||||
"100",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"1000",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000",
|
||||
"500"
|
||||
],
|
||||
"machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...",
|
||||
"z_hop_types": [
|
||||
"Slope Lift"
|
||||
]
|
||||
}
|
||||
12
resources/profiles/MagicMaker/machine/MM BoneKing.json
Normal file
12
resources/profiles/MagicMaker/machine/MM BoneKing.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "MM BoneKing",
|
||||
"model_id": "MM-BoneKing",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "magicmaker",
|
||||
"bed_model": "310_buildplate_model.stl",
|
||||
"bed_texture": "MM_buildplate_texture.png",
|
||||
"hotend_model": "MM_hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System;Generic PC @System;Generic PA @System;MM Generic PEEK"
|
||||
}
|
||||
134
resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json
Normal file
134
resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json
Normal file
@@ -0,0 +1,134 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MM hj SK 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "MM hj SK",
|
||||
"default_print_profile": "0.10mm Fine @MM hj SK",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_settings_id": "MM",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"cooling_tube_length": "20",
|
||||
"cooling_tube_retraction": "60",
|
||||
"extruder_clearance_height_to_lid": "100",
|
||||
"extruder_clearance_height_to_rod": "32",
|
||||
"extruder_clearance_radius": "50",
|
||||
"machine_max_acceleration_e": [
|
||||
"6000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"120"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"nozzle_type": "brass",
|
||||
"parking_pos_retraction": "22",
|
||||
"retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"220x220"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END",
|
||||
"machine_start_gcode": "G0 Z3 F300\nG90 ;absolute positioning\n;GZBC\n;G28 ;Home\nM190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\n;BED_MESH_CLEAR ;touch\n;BLTOUCH_DEBUG COMMAND=reset ;touch\n;BED_MESH_CALIBRATE ;touch\n;BED_MESH_CALIBRATE METHOD=scan SCAN_MODE=rapid ;eddy\n;G1 Z5 F300;TB\n;G1 X0 Y0 ;TB\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28;Home\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...",
|
||||
"z_hop_types": [
|
||||
"Slope Lift"
|
||||
]
|
||||
}
|
||||
12
resources/profiles/MagicMaker/machine/MM hj SK.json
Normal file
12
resources/profiles/MagicMaker/machine/MM hj SK.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "MM hj SK",
|
||||
"model_id": "MM-hj-SK",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "magicmaker",
|
||||
"bed_model": "220210_buildplate_model.stl",
|
||||
"bed_texture": "MM_buildplate_texture.png",
|
||||
"hotend_model": "MM_hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
134
resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json
Normal file
134
resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json
Normal file
@@ -0,0 +1,134 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MM hqs SF 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "MM hqs SF",
|
||||
"default_print_profile": "0.10mm Fine @MM hqs SF",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_settings_id": "MM",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"cooling_tube_length": "20",
|
||||
"cooling_tube_retraction": "60",
|
||||
"extruder_clearance_height_to_lid": "100",
|
||||
"extruder_clearance_height_to_rod": "32",
|
||||
"extruder_clearance_radius": "50",
|
||||
"machine_max_acceleration_e": [
|
||||
"6000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"120"
|
||||
],
|
||||
"machine_pause_gcode": "M601",
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"nozzle_type": "brass",
|
||||
"parking_pos_retraction": "22",
|
||||
"retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"220x220"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"gcode_flavor": "marlin2",
|
||||
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END",
|
||||
"machine_max_acceleration_x": [
|
||||
"10000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000",
|
||||
"3000"
|
||||
],
|
||||
"machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n ;G29\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...",
|
||||
"z_hop_types": [
|
||||
"Slope Lift"
|
||||
]
|
||||
}
|
||||
12
resources/profiles/MagicMaker/machine/MM hqs SF.json
Normal file
12
resources/profiles/MagicMaker/machine/MM hqs SF.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "MM hqs SF",
|
||||
"model_id": "MM-hqs-SF",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "magicmaker",
|
||||
"bed_model": "220210_buildplate_model.stl",
|
||||
"bed_texture": "MM_buildplate_texture.png",
|
||||
"hotend_model": "MM_hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
133
resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json
Normal file
133
resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json
Normal file
@@ -0,0 +1,133 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MM hqs hj 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "MM hqs hj",
|
||||
"default_print_profile": "0.10mm Fine @MM hqs hj",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_settings_id": "MM",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"cooling_tube_length": "20",
|
||||
"cooling_tube_retraction": "60",
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"extruder_clearance_height_to_lid": "100",
|
||||
"extruder_clearance_height_to_rod": "32",
|
||||
"extruder_clearance_radius": "50",
|
||||
"machine_max_acceleration_e": [
|
||||
"6000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"500"
|
||||
],
|
||||
"machine_pause_gcode": "M601",
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"nozzle_type": "brass",
|
||||
"parking_pos_retraction": "22",
|
||||
"retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"2000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"2000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"thumbnails": [
|
||||
"220x220"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END",
|
||||
"machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n ;G29\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing..."
|
||||
}
|
||||
12
resources/profiles/MagicMaker/machine/MM hqs hj.json
Normal file
12
resources/profiles/MagicMaker/machine/MM hqs hj.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "MM hqs hj",
|
||||
"model_id": "MM-hqs-hj",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "magicmaker",
|
||||
"bed_model": "220210_buildplate_model.stl",
|
||||
"bed_texture": "MM_buildplate_texture.png",
|
||||
"hotend_model": "MM_hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
133
resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json
Normal file
133
resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json
Normal file
@@ -0,0 +1,133 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MM slb 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "MM slb",
|
||||
"default_print_profile": "0.10mm Fine @MM slb",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"125x0",
|
||||
"125x125",
|
||||
"0x125"
|
||||
],
|
||||
"printable_height": "160",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_settings_id": "MM",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"cooling_tube_length": "20",
|
||||
"cooling_tube_retraction": "60",
|
||||
"extruder_clearance_height_to_lid": "100",
|
||||
"extruder_clearance_height_to_rod": "32",
|
||||
"extruder_clearance_radius": "50",
|
||||
"machine_max_acceleration_e": [
|
||||
"4000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"120"
|
||||
],
|
||||
"machine_pause_gcode": "M601",
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"nozzle_type": "brass",
|
||||
"parking_pos_retraction": "22",
|
||||
"retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"125x125"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"2000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"2000",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"500"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"2000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"3000"
|
||||
],
|
||||
"machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n;G29\nG0 Z5 F300\nG1 X0 Y50 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E10\nG1 F1000 X50 E18\nG92 E0\nM117 Printing...",
|
||||
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 \nM83\nG1 E-1 F600 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z1 F600\nG90 ;absolute positioning\nG1 X0 Y120 F6000\nG1 E-4 F1200\nM107 ; turn off fan\nM84 ;steppers off\nPRINT_END",
|
||||
"z_hop_types": [
|
||||
"Slope Lift"
|
||||
]
|
||||
}
|
||||
12
resources/profiles/MagicMaker/machine/MM slb.json
Normal file
12
resources/profiles/MagicMaker/machine/MM slb.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "MM slb",
|
||||
"model_id": "MM-slb",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "magicmaker",
|
||||
"bed_model": "125_buildplate_model.stl",
|
||||
"bed_texture": "MM_buildplate_texture.png",
|
||||
"hotend_model": "MM_hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
118
resources/profiles/MagicMaker/machine/fdm_machine_common.json
Normal file
118
resources/profiles/MagicMaker/machine/fdm_machine_common.json
Normal file
@@ -0,0 +1,118 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_height": "212",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"6"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.10mm Fine @MM hj",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": ""
|
||||
}
|
||||
BIN
resources/profiles/MagicMaker/magicmaker_hotend.stl
Normal file
BIN
resources/profiles/MagicMaker/magicmaker_hotend.stl
Normal file
Binary file not shown.
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_acceleration": "500",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"top_surface_speed": "60",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "3000",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
115
resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json
Normal file
115
resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json
Normal file
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine @MM hj SK",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_acceleration": "500",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"top_surface_speed": "60",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "3000",
|
||||
"compatible_printers": [
|
||||
"MM hj SK 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine @MM hqs SF",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_acceleration": "500",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"top_surface_speed": "60",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "3000",
|
||||
"compatible_printers": [
|
||||
"MM hqs SF 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine @MM hqs hj",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bridge_acceleration": "1000",
|
||||
"default_acceleration": "1600",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_acceleration": "1200",
|
||||
"initial_layer_acceleration": "500",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_acceleration": "1600",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_acceleration": "1600",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_speed": "60",
|
||||
"travel_acceleration": "1600",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"compatible_printers": [
|
||||
"MM hqs hj 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
115
resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json
Normal file
115
resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json
Normal file
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine @MM slb",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bridge_acceleration": "1000",
|
||||
"enable_support": "1",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"top_surface_acceleration": "1000",
|
||||
"default_acceleration": "1200",
|
||||
"gap_infill_speed": "60",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_acceleration": "500",
|
||||
"inner_wall_acceleration": "1000",
|
||||
"inner_wall_speed": "45",
|
||||
"internal_solid_infill_acceleration": "1200",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"outer_wall_acceleration": "800",
|
||||
"outer_wall_speed": "30",
|
||||
"sparse_infill_acceleration": "1200",
|
||||
"sparse_infill_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"support_speed": "60",
|
||||
"top_surface_speed": "50",
|
||||
"travel_acceleration": "1200",
|
||||
"travel_speed": "120",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"compatible_printers": [
|
||||
"MM slb 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,116 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine Fast @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "3000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "250",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "150",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "250",
|
||||
"support_interface_speed": "80",
|
||||
"support_speed": "150",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,116 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine Fast @MM hj SK",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "3000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "250",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "150",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "250",
|
||||
"support_interface_speed": "80",
|
||||
"support_speed": "150",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM hj SK 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,116 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Fine Fast @MM hqs SF",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "3000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "250",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "150",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "250",
|
||||
"support_interface_speed": "80",
|
||||
"support_speed": "150",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM hqs SF 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,116 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine BestFast @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"bridge_acceleration": "50000",
|
||||
"default_acceleration": "100000",
|
||||
"gap_infill_speed": "1000",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "100000",
|
||||
"inner_wall_speed": "800",
|
||||
"internal_solid_infill_speed": "1000",
|
||||
"layer_height": "0.12",
|
||||
"outer_wall_acceleration": "50000",
|
||||
"outer_wall_speed": "500",
|
||||
"overhang_2_4_speed": "30",
|
||||
"sparse_infill_speed": "1000",
|
||||
"support_interface_speed": "100",
|
||||
"support_speed": "350",
|
||||
"top_surface_speed": "800",
|
||||
"travel_acceleration": "100000",
|
||||
"travel_speed": "1500",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,116 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine SuperFast @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "6",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"enable_support": "1",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_shell_layers": "8",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"default_acceleration": "10000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"support_interface_speed": "80",
|
||||
"support_speed": "150",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "10000",
|
||||
"bridge_acceleration": "5000",
|
||||
"gap_infill_speed": "350",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_speed": "350",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"layer_height": "0.12",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_2_4_speed": "30",
|
||||
"sparse_infill_speed": "450",
|
||||
"top_surface_speed": "200",
|
||||
"travel_speed": "500",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"initial_layer_acceleration": "500",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_travel_speed": "60",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_speed": "60",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "3000",
|
||||
"travel_speed": "150",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @MM hj SK",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"initial_layer_acceleration": "500",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_travel_speed": "60",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_speed": "60",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "3000",
|
||||
"travel_speed": "150",
|
||||
"compatible_printers": [
|
||||
"MM hj SK 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @MM hqs SF",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"initial_layer_acceleration": "500",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_travel_speed": "60",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_speed": "60",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "3000",
|
||||
"travel_speed": "150",
|
||||
"compatible_printers": [
|
||||
"MM hqs SF 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @MM hqs hj",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_travel_speed": "60",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_acceleration": "1000",
|
||||
"default_acceleration": "1600",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_acceleration": "1200",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_acceleration": "1600",
|
||||
"internal_solid_infill_speed": "90",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_speed": "45",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_acceleration": "1600",
|
||||
"initial_layer_acceleration": "500",
|
||||
"sparse_infill_speed": "90",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_interface_speed": "90",
|
||||
"support_speed": "80",
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_speed": "60",
|
||||
"travel_acceleration": "1600",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"compatible_printers": [
|
||||
"MM hqs hj 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @MM slb",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_travel_speed": "60",
|
||||
"travel_speed": "120",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_acceleration": "1000",
|
||||
"enable_support": "1",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_acceleration": "1000",
|
||||
"default_acceleration": "1200",
|
||||
"gap_infill_speed": "60",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "1000",
|
||||
"inner_wall_speed": "45",
|
||||
"internal_solid_infill_acceleration": "1200",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"outer_wall_acceleration": "800",
|
||||
"outer_wall_speed": "30",
|
||||
"sparse_infill_acceleration": "1200",
|
||||
"sparse_infill_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"support_speed": "60",
|
||||
"top_surface_speed": "50",
|
||||
"travel_acceleration": "1200",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"compatible_printers": [
|
||||
"MM slb 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard Fast @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"top_shell_layers": "6",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "5000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "200",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "240",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "150",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "250",
|
||||
"support_interface_speed": "80",
|
||||
"support_speed": "150",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard Fast @MM hj SK",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"top_shell_layers": "6",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "5000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "200",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "240",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "150",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "250",
|
||||
"support_interface_speed": "80",
|
||||
"support_speed": "150",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM hj SK 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard Fast @MM hqs sf",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "20%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.45",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.45",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"top_shell_layers": "6",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "5000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "200",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "240",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "150",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "250",
|
||||
"support_interface_speed": "80",
|
||||
"support_speed": "150",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM hqs sf 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"initial_layer_acceleration": "500",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "90",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "55",
|
||||
"internal_solid_infill_speed": "80",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "40",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "80",
|
||||
"support_speed": "70",
|
||||
"top_shell_layers": "4",
|
||||
"top_surface_speed": "50",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "3000",
|
||||
"travel_acceleration": "3000",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft @MM hj SK",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"initial_layer_acceleration": "500",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "90",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "55",
|
||||
"internal_solid_infill_speed": "80",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "40",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "80",
|
||||
"support_speed": "70",
|
||||
"top_shell_layers": "4",
|
||||
"top_surface_speed": "50",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "3000",
|
||||
"travel_acceleration": "3000",
|
||||
"compatible_printers": [
|
||||
"MM hj SK 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft @MM hqs SF",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"initial_layer_acceleration": "500",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "90",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_speed": "55",
|
||||
"internal_solid_infill_speed": "80",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_speed": "40",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_speed": "80",
|
||||
"support_speed": "70",
|
||||
"top_shell_layers": "4",
|
||||
"top_surface_speed": "50",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1600",
|
||||
"sparse_infill_acceleration": "3000",
|
||||
"top_surface_acceleration": "3000",
|
||||
"travel_acceleration": "3000",
|
||||
"compatible_printers": [
|
||||
"MM hqs SF 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft @MM hqs hj",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bridge_acceleration": "1000",
|
||||
"default_acceleration": "1600",
|
||||
"enable_support": "1",
|
||||
"gap_infill_speed": "90",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"inner_wall_acceleration": "1200",
|
||||
"inner_wall_speed": "55",
|
||||
"internal_solid_infill_acceleration": "1600",
|
||||
"internal_solid_infill_speed": "80",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_speed": "40",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"sparse_infill_acceleration": "1600",
|
||||
"sparse_infill_speed": "80",
|
||||
"support_speed": "70",
|
||||
"top_shell_layers": "4",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_speed": "50",
|
||||
"travel_acceleration": "1600",
|
||||
"initial_layer_acceleration": "500",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"compatible_printers": [
|
||||
"MM hqs hj 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
113
resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json
Normal file
113
resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json
Normal file
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft @MM slb",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bridge_acceleration": "1000",
|
||||
"enable_support": "1",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "15",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"top_shell_layers": "4",
|
||||
"top_surface_acceleration": "1000",
|
||||
"default_acceleration": "1200",
|
||||
"gap_infill_speed": "50",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"inner_wall_acceleration": "1000",
|
||||
"inner_wall_speed": "40",
|
||||
"internal_solid_infill_acceleration": "1200",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"outer_wall_acceleration": "800",
|
||||
"outer_wall_speed": "30",
|
||||
"sparse_infill_acceleration": "1200",
|
||||
"sparse_infill_speed": "50",
|
||||
"support_interface_speed": "50",
|
||||
"support_speed": "50",
|
||||
"top_surface_speed": "40",
|
||||
"travel_acceleration": "1200",
|
||||
"travel_speed": "120",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"compatible_printers": [
|
||||
"MM slb 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft Fast @MM BoneKing",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"top_shell_layers": "4",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "5000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "200",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "120",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "200",
|
||||
"support_speed": "130",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "150",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM BoneKing 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft Fast @MM hj SK",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"top_shell_layers": "4",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "5000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "200",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "120",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "200",
|
||||
"support_speed": "130",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "150",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM hj SK 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft Fast @MM hqs SF",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "35%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"enable_support": "1",
|
||||
"layer_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"skirt_distance": "1",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"top_shell_layers": "4",
|
||||
"wall_loops": "3",
|
||||
"wipe_on_loops": "1",
|
||||
"bridge_acceleration": "5000",
|
||||
"default_acceleration": "10000",
|
||||
"gap_infill_speed": "200",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_speed": "120",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_speed": "200",
|
||||
"support_speed": "130",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "150",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_speed": "300",
|
||||
"compatible_printers": [
|
||||
"MM hqs SF 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,70 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "5",
|
||||
"compatible_printers": [],
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"outer_wall_speed": "120",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "20",
|
||||
"gap_infill_speed": "30",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "25%",
|
||||
"sparse_infill_speed": "50",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "3",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "40",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "40",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_surface_speed": "30",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0"
|
||||
}
|
||||
Reference in New Issue
Block a user