Initial release

resources/profiles/Flashforge/process/0.42mm Standard @FF G4 0.6 nozzle.json

@@ -0,0 +1,66 @@
+{
+    "type": "process",
+    "name": "0.42mm Standard @FF G4 0.6 nozzle",
+    "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "bottom_solid_infill_flow_ratio": "0.96",
+    "bridge_acceleration": "3000",
+    "brim_type": "auto_brim",
+    "enable_arc_fitting": "1",
+    "enable_prime_tower": "1",
+    "exclude_object": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "filter_out_gap_fill": "0.1",
+    "flush_into_support": "1",
+    "compatible_printers": [
+        "Flashforge Guider4 0.6 nozzle"
+    ],
+    "gap_fill_target": "topbottom",
+    "infill_wall_overlap": "20%",
+    "initial_layer_acceleration": "800",
+    "initial_layer_infill_speed": "60",
+    "initial_layer_line_width": "0.62",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "40",
+    "initial_layer_travel_speed": "600",
+    "inner_wall_acceleration": "10000",
+    "inner_wall_line_width": "0.62",
+    "internal_bridge_flow": "0.96",
+    "internal_bridge_speed": "35",
+    "internal_solid_infill_acceleration": "8000",
+    "internal_solid_infill_line_width": "0.62",
+    "internal_solid_infill_speed": "120",
+    "layer_height": "0.42",
+    "line_width": "0.62",
+    "outer_wall_line_width": "0.62",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "12",
+    "prime_tower_brim_width": "6",
+    "prime_volume": "80",
+    "print_settings_id": "0.42mm Standard @FF G4 0.6 nozzle",
+    "role_based_wipe_speed": "0",
+    "seam_gap": "10%",
+    "skirt_loops": "0",
+    "slowdown_for_curled_perimeters": "0",
+    "small_perimeter_speed": "35",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_line_width": "0.62",
+    "sparse_infill_speed": "220",
+    "support_bottom_z_distance": "0.3",
+    "support_interface_filament": "0",
+    "support_line_width": "0.62",
+    "support_speed": "70",
+    "top_shell_thickness": "0.8",
+    "top_solid_infill_flow_ratio": "0.96",
+    "top_surface_acceleration": "3000",
+    "top_surface_line_width": "0.62",
+    "top_surface_speed": "100",
+    "travel_acceleration": "20000",
+    "travel_speed": "550",
+    "wipe_speed": "50",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "10",
+    "wipe_tower_extra_spacing": "110%"
+}