PublicCodeMirror/OrcaSlicer-bambulab
1
0
Fork 0
mirror of https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git synced 2026-05-14 13:02:39 -07:00
Code Issues Packages Projects Releases Wiki Activity

Initial release

Browse Source
This commit is contained in:
Jake
2026-05-11 19:29:55 +01:00
commit d4d1215874
16967 changed files with 4075897 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

60
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.2 nozzle).json Normal file
View File

@@ -0,0 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.16"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

60
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.4 nozzle).json Normal file
View File

@@ -0,0 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

60
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.6 nozzle).json Normal file
View File

@@ -0,0 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.4"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

60
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.8 nozzle).json Normal file
View File

@@ -0,0 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.6"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

124
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.2 nozzle).json Normal file
View File

@@ -0,0 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.15"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

124
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.4 nozzle).json Normal file
View File

@@ -0,0 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

124
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.6 nozzle).json Normal file
View File

@@ -0,0 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.48"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

124
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.8 nozzle).json Normal file
View File

@@ -0,0 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.64"
],
"min_layer_height": [
"0.20"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

15
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max.json Normal file
View File

@@ -0,0 +1,15 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4 Max",
"model_id": "Elegoo-Neptune-4-Max",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4max_buildplate_model.stl",
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
"bed_exclude_area": [
"0x0"
],
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

169
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.2 nozzle).json Normal file
View File

@@ -0,0 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.15"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

169
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.4 nozzle).json Normal file
View File

@@ -0,0 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

169
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.6 nozzle).json Normal file
View File

@@ -0,0 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"25",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.48"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

169
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.8 nozzle).json Normal file
View File

@@ -0,0 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"25",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.64"
],
"min_layer_height": [
"0.20"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

15
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus.json Normal file
View File

@@ -0,0 +1,15 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4 Plus",
"model_id": "Elegoo-Neptune-4-Plus",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4plus_buildplate_model.stl",
"bed_texture": "elegoo_neptune4plus_buildplate_texture.png",
"bed_exclude_area": [
"0x0"
],
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

60
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.2 nozzle).json Normal file
View File

@@ -0,0 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.16"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

60
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.4 nozzle).json Normal file
View File

@@ -0,0 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

60
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.6 nozzle).json Normal file
View File

@@ -0,0 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.4"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

120
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.8 nozzle).json Normal file
View File

@@ -0,0 +1,120 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"gcode_flavor": "klipper",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"max_layer_height": [
"0.6"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

12
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4 Pro",
"model_id": "Elegoo-Neptune-4-Pro",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4pro_buildplate_model.stl",
"bed_texture": "elegoo_neptune4pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

12
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4.json Normal file
View File

@@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4",
"model_id": "Elegoo-Neptune-4",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4_buildplate_model.stl",
"bed_texture": "elegoo_neptune4_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

145
resources/profiles/Elegoo/machine/EN4SERIES/fdm_neptune_4_common.json Normal file
View File

@@ -0,0 +1,145 @@
{
"type": "machine",
"name": "fdm_neptune_4_common",
"inherits": "fdm_elegoo_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "klipper",
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"10000",
"10000"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "280",
"extruder_clearance_radius": "47",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"deretraction_speed": [
"40"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"default_print_profile": "",
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "",
"machine_end_gcode": "",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"thumbnails": [
"320x320/PNG",
"32x32/COLPIC",
"160x160/COLPIC"
],
"thumbnails_format": "PNG"
}