Initial release

resources/profiles/Elegoo/filament/EC/Elegoo ASA @EC.json

@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "name": "Elegoo ASA @EC",
+    "inherits": "Elegoo ASA @base",
+    "from": "system",
+    "setting_id": "EASAEC",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo PETG PRO @EC.json

@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG PRO @EC",
+    "inherits": "Elegoo PETG PRO @base",
+    "from": "system",
+    "setting_id": "EPETGPROEC",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo PLA @EC.json

@@ -0,0 +1,31 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA @EC",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAEC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo PLA Matte @EC.json

@@ -0,0 +1,46 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Matte @EC",
+    "inherits": "Elegoo PLA Matte @base",
+    "from": "system",
+    "setting_id": "EPLAMEC",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo PLA PRO @EC.json

@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA PRO @EC",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAPROEC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo PLA Silk @EC.json

@@ -0,0 +1,43 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Silk @EC",
+    "inherits": "Elegoo PLA Silk @base",
+    "from": "system",
+    "setting_id": "EPLASEC",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo PLA+ @EC.json

@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA+ @EC",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAPLUSEC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo Rapid PETG @EC.json

@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Elegoo Rapid PETG @EC",
+    "renamed_from": "Elegoo RAPID PETG @EC",
+    "inherits": "Elegoo Rapid PETG @base",
+    "from": "system",
+    "setting_id": "ERPETGEC",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo Rapid PLA+ @EC.json

@@ -0,0 +1,47 @@
+{
+    "type": "filament",
+    "name": "Elegoo Rapid PLA+ @EC",
+    "renamed_from": "Elegoo RAPID PLA+ @EC",
+    "inherits": "Elegoo Rapid PLA+ @base",
+    "from": "system",
+    "setting_id": "ERPLAPLUSEC",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/EC/Elegoo TPU 95A @EC.json

@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Elegoo TPU 95A @EC",
+    "inherits": "Elegoo TPU 95A @base",
+    "from": "system",
+    "setting_id": "ETPU95AEC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.4 nozzle",
+        "Elegoo Centauri 0.6 nozzle",
+        "Elegoo Centauri 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo ASA @ECC.json

@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "name": "Elegoo ASA @ECC",
+    "inherits": "Elegoo ASA @base",
+    "from": "system",
+    "setting_id": "EASAECC",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo PETG PRO @ECC.json

@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG PRO @ECC",
+    "inherits": "Elegoo PETG PRO @base",
+    "from": "system",
+    "setting_id": "EPETGPROECC",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo PLA @ECC.json

@@ -0,0 +1,31 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA @ECC",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAECC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo PLA Matte @ECC.json

@@ -0,0 +1,46 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Matte @ECC",
+    "inherits": "Elegoo PLA Matte @base",
+    "from": "system",
+    "setting_id": "EPLAMECC",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo PLA PRO @ECC.json

@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA PRO @ECC",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAPROECC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo PLA Silk @ECC.json

@@ -0,0 +1,43 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Silk @ECC",
+    "inherits": "Elegoo PLA Silk @base",
+    "from": "system",
+    "setting_id": "EPLASECC",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo PLA+ @ECC.json

@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA+ @ECC",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAPLUSECC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo PLA-CF @ECC.json

@@ -0,0 +1,46 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA-CF @ECC",
+    "inherits": "Elegoo PLA-CF @base",
+    "from": "system",
+    "setting_id": "EPLACFECC",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo Rapid PETG @ECC.json

@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Elegoo Rapid PETG @ECC",
+    "renamed_from": "Elegoo RAPID PETG @ECC",
+    "inherits": "Elegoo Rapid PETG @base",
+    "from": "system",
+    "setting_id": "ERPETGECC",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo Rapid PLA+ @ECC.json

@@ -0,0 +1,47 @@
+{
+    "type": "filament",
+    "name": "Elegoo Rapid PLA+ @ECC",
+    "renamed_from": "Elegoo RAPID PLA+ @ECC",
+    "inherits": "Elegoo Rapid PLA+ @base",
+    "from": "system",
+    "setting_id": "ERPLAPLUSECC",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC/Elegoo TPU 95A @ECC.json

@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Elegoo TPU 95A @ECC",
+    "inherits": "Elegoo TPU 95A @base",
+    "from": "system",
+    "setting_id": "ETPU95AECC",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 0.4 nozzle",
+        "Elegoo Centauri Carbon 0.6 nozzle",
+        "Elegoo Centauri Carbon 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo ABS @ECC2.json

@@ -0,0 +1,29 @@
+{
+    "type": "filament",
+    "name": "Elegoo ABS @ECC2",
+    "inherits": "Elegoo ABS @base",
+    "from": "system",
+    "setting_id": "EABSECC2",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "40"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}
+  

resources/profiles/Elegoo/filament/ECC2/Elegoo ASA @ECC2.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Elegoo ASA @ECC2",
+    "inherits": "Elegoo ASA @base",
+    "from": "system",
+    "setting_id": "EASAECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}
+  

resources/profiles/Elegoo/filament/ECC2/Elegoo PAHT-CF @ECC2.json

@@ -0,0 +1,70 @@
+{
+    "type": "filament",
+    "name": "Elegoo PAHT-CF @ECC2",
+    "inherits": "Elegoo PAHT @base",
+    "from": "system",
+    "setting_id": "EPAHTCFECC2",
+    "instantiation": "true",
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PC @ECC2.json

@@ -0,0 +1,55 @@
+{
+    "type": "filament",
+    "name": "Elegoo PC @ECC2",
+    "inherits": "Elegoo PC @base",
+    "from": "system",
+    "setting_id": "EPCECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "35"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PC-FR @ECC2.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Elegoo PC-FR @ECC2",
+    "inherits": "Elegoo PC @base",
+    "from": "system",
+    "setting_id": "EPCFRECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "filament_density": [
+		"1.1"
+	],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}
+  

resources/profiles/Elegoo/filament/ECC2/Elegoo PETG @ECC2.json

@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG @ECC2",
+    "inherits": "Elegoo PETG @base",
+    "from": "system",
+    "setting_id": "EPETGECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "overhang_fan_threshold": [
+		"50%"
+	],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "filament_max_volumetric_speed": [
+        "11"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PETG PRO @ECC2.json

@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG PRO @ECC2",
+    "inherits": "Elegoo PETG @base",
+    "from": "system",
+    "setting_id": "EPETGPROECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "overhang_fan_threshold": [
+		"50%"
+	],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PETG Translucent @ECC2.json

@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG Translucent @ECC2",
+    "inherits": "Elegoo PETG @base",
+    "from": "system",
+    "setting_id": "EPETGTRANSECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "fan_max_speed": [
+        "35"
+    ],
+    "filament_max_volumetric_speed": [
+        "10"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PETG-CF @ECC2.json

@@ -0,0 +1,43 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG-CF @ECC2",
+    "inherits": "Elegoo PETG @base",
+    "from": "system",
+    "setting_id": "EPETGCFECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "5"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PETG-GF @ECC2.json

@@ -0,0 +1,43 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG-GF @ECC2",
+    "inherits": "Elegoo PETG @base",
+    "from": "system",
+    "setting_id": "EPETGFECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "5"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA @ECC2.json

@@ -0,0 +1,31 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAECC2",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+      "21"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA Basic @ECC2.json

@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Basic @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLABASICECC2",
+    "instantiation": "true",
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA Galaxy @ECC2.json

@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Galaxy @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAGALAXYECC2",
+    "instantiation": "true",
+    "fan_min_speed": [
+        "80"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA Marble @ECC2.json

@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Marble @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAMARBLEECC2",
+    "instantiation": "true",
+    "fan_min_speed": [
+        "80"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA Matte @ECC2.json

@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Matte @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAMECC2",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA PRO @ECC2.json

@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA PRO @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAPROECC2",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+      "20"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA Silk @ECC2.json

@@ -0,0 +1,52 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Silk @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLASECC2",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_density": [
+        "1.32"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA Sparkle @ECC2.json

@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Sparkle @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLASPARKLEECC2",
+    "instantiation": "true",
+    "fan_min_speed": [
+        "80"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA Wood @ECC2.json

@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA Wood @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAWOODECC2",
+    "instantiation": "true",
+    "fan_min_speed": [
+        "80"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA+ @ECC2.json

@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA+ @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLAPLUSECC2",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+      "20"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo PLA-CF @ECC2.json

@@ -0,0 +1,61 @@
+{
+    "type": "filament",
+    "name": "Elegoo PLA-CF @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "EPLACFECC2",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "additional_cooling_fan_speed": [
+		"0"
+	],
+	"cool_plate_temp": [
+		"45"
+	],
+	"cool_plate_temp_initial_layer": [
+		"45"
+	],
+	"filament_density": [
+		"1.21"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo Rapid PETG @ECC2.json

@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Elegoo Rapid PETG @ECC2",
+    "renamed_from": "Elegoo RAPID PETG @ECC2",
+    "inherits": "Elegoo PETG @base",
+    "from": "system",
+    "setting_id": "ERPETGECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo Rapid PLA+ @ECC2.json

@@ -0,0 +1,50 @@
+{
+    "type": "filament",
+    "name": "Elegoo Rapid PLA+ @ECC2",
+    "renamed_from": "Elegoo RAPID PLA+ @ECC2",
+    "inherits": "Elegoo PLA @base",
+    "from": "system",
+    "setting_id": "ERPLAPLUSECC2",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_density": [
+		"1.25"
+	],
+    "filament_start_gcode": [
+      "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo Rapid TPU 95A @ECC2.json

@@ -0,0 +1,29 @@
+{
+    "type": "filament",
+    "name": "Elegoo Rapid TPU 95A @ECC2",
+    "renamed_from": "Elegoo RAPID TPU 95A @ECC2",
+    "inherits": "Elegoo TPU @base",
+    "from": "system",
+    "setting_id": "ERTPU95AECC2",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ECC2/Elegoo TPU 95A @ECC2.json

@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Elegoo TPU 95A @ECC2",
+    "inherits": "Elegoo TPU @base",
+    "from": "system",
+    "setting_id": "ETPU95AECC2",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri Carbon 2 0.4 nozzle",
+        "Elegoo Centauri Carbon 2 0.6 nozzle",
+        "Elegoo Centauri Carbon 2 0.8 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ELEGOO/Elegoo ABS @0.2 nozzle.json

@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Elegoo ABS @0.2 nozzle",
+    "inherits": "Elegoo ABS @base",
+    "from": "system",
+    "setting_id": "EABS00020",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "40"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.2 nozzle",
+        "Elegoo Centauri Carbon 0.2 nozzle",
+        "Elegoo Centauri Carbon 2 0.2 nozzle",
+        "Elegoo Neptune 4 0.2 nozzle",
+        "Elegoo Neptune 4 Pro 0.2 nozzle",
+        "Elegoo Neptune 4 Plus 0.2 nozzle",
+        "Elegoo Neptune 4 Max 0.2 nozzle",
+        "Elegoo Neptune 3 Pro 0.2 nozzle",
+        "Elegoo Neptune 3 Plus 0.2 nozzle",
+        "Elegoo Neptune 3 Max 0.2 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ELEGOO/Elegoo ASA @0.2 nozzle.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Elegoo ASA @0.2 nozzle",
+    "inherits": "Elegoo ASA @base",
+    "from": "system",
+    "setting_id": "EASA00020",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.2 nozzle",
+        "Elegoo Centauri Carbon 0.2 nozzle",
+        "Elegoo Centauri Carbon 2 0.2 nozzle",
+        "Elegoo Neptune 4 0.2 nozzle",
+        "Elegoo Neptune 4 Pro 0.2 nozzle",
+        "Elegoo Neptune 4 Plus 0.2 nozzle",
+        "Elegoo Neptune 4 Max 0.2 nozzle",
+        "Elegoo Neptune 3 Pro 0.2 nozzle",
+        "Elegoo Neptune 3 Plus 0.2 nozzle",
+        "Elegoo Neptune 3 Max 0.2 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ELEGOO/Elegoo ASA.json

@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Elegoo ASA",
+    "inherits": "Elegoo ASA @base",
+    "from": "system",
+    "setting_id": "EASA00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Elegoo Neptune 0.4 nozzle",
+        "Elegoo Neptune X 0.4 nozzle",
+        "Elegoo Neptune 2 0.4 nozzle",
+        "Elegoo Neptune 2S 0.4 nozzle",
+        "Elegoo Neptune 2D 0.4 nozzle",
+        "Elegoo Neptune 3 0.4 nozzle",
+        "Elegoo Neptune 3 Pro 0.4 nozzle",
+        "Elegoo Neptune 3 Plus 0.4 nozzle",
+        "Elegoo Neptune 3 Max 0.4 nozzle",
+        "Elegoo Neptune 4 (0.2 nozzle)",
+        "Elegoo Neptune 4 (0.4 nozzle)",
+        "Elegoo Neptune 4 (0.6 nozzle)",
+        "Elegoo Neptune 4 (0.8 nozzle)",
+        "Elegoo Neptune 4 Max (0.2 nozzle)",
+        "Elegoo Neptune 4 Max (0.4 nozzle)",
+        "Elegoo Neptune 4 Max (0.6 nozzle)",
+        "Elegoo Neptune 4 Max (0.8 nozzle)",
+        "Elegoo Neptune 4 Plus (0.2 nozzle)",
+        "Elegoo Neptune 4 Plus (0.4 nozzle)",
+        "Elegoo Neptune 4 Plus (0.6 nozzle)",
+        "Elegoo Neptune 4 Plus (0.8 nozzle)",
+        "Elegoo Neptune 4 Pro (0.2 nozzle)",
+        "Elegoo Neptune 4 Pro (0.4 nozzle)",
+        "Elegoo Neptune 4 Pro (0.6 nozzle)",
+        "Elegoo Neptune 4 Pro (0.8 nozzle)"
+    ]
+}

resources/profiles/Elegoo/filament/ELEGOO/Elegoo PC @0.2 nozzle.json

@@ -0,0 +1,62 @@
+{
+    "type": "filament",
+    "name": "Elegoo PC @0.2 nozzle",
+    "inherits": "Elegoo PC @base",
+    "from": "system",
+    "setting_id": "EPC00020",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "35"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.2 nozzle",
+        "Elegoo Centauri Carbon 0.2 nozzle",
+        "Elegoo Centauri Carbon 2 0.2 nozzle",
+        "Elegoo Neptune 4 0.2 nozzle",
+        "Elegoo Neptune 4 Pro 0.2 nozzle",
+        "Elegoo Neptune 4 Plus 0.2 nozzle",
+        "Elegoo Neptune 4 Max 0.2 nozzle",
+        "Elegoo Neptune 3 Pro 0.2 nozzle",
+        "Elegoo Neptune 3 Plus 0.2 nozzle",
+        "Elegoo Neptune 3 Max 0.2 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ELEGOO/Elegoo PC-FR @0.2 nozzle.json

@@ -0,0 +1,47 @@
+{
+    "type": "filament",
+    "name": "Elegoo PC-FR @0.2 nozzle",
+    "inherits": "Elegoo PC @base",
+    "from": "system",
+    "setting_id": "EPCFR00020",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "filament_density": [
+        "1.1"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.2 nozzle",
+        "Elegoo Centauri Carbon 0.2 nozzle",
+        "Elegoo Centauri Carbon 2 0.2 nozzle",
+        "Elegoo Neptune 4 0.2 nozzle",
+        "Elegoo Neptune 4 Pro 0.2 nozzle",
+        "Elegoo Neptune 4 Plus 0.2 nozzle",
+        "Elegoo Neptune 4 Max 0.2 nozzle",
+        "Elegoo Neptune 3 Pro 0.2 nozzle",
+        "Elegoo Neptune 3 Plus 0.2 nozzle",
+        "Elegoo Neptune 3 Max 0.2 nozzle"
+    ]
+}

resources/profiles/Elegoo/filament/ELEGOO/Elegoo PETG @0.2 nozzle.json

@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Elegoo PETG @0.2 nozzle",
+    "inherits": "Elegoo PETG @base",
+    "from": "system",
+    "setting_id": "EPETG00020",
+    "instantiation": "true",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "filament_max_volumetric_speed": [
+        "11"
+    ],
+    "compatible_printers": [
+        "Elegoo Centauri 0.2 nozzle",
+        "Elegoo Centauri Carbon 0.2 nozzle",
+        "Elegoo Centauri Carbon 2 0.2 nozzle",
+        "Elegoo Neptune 4 0.2 nozzle",
+        "Elegoo Neptune 4 Pro 0.2 nozzle",
+        "Elegoo Neptune 4 Plus 0.2 nozzle",
+        "Elegoo Neptune 4 Max 0.2 nozzle",
+        "Elegoo Neptune 3 Pro 0.2 nozzle",
+        "Elegoo Neptune 3 Plus 0.2 nozzle",
+        "Elegoo Neptune 3 Max 0.2 nozzle"
+    ]
+}