Initial release

resources/profiles/Anycubic/machine/Anycubic Predator 0.4 nozzle.json

@@ -0,0 +1,99 @@
+{
+    "type": "machine",
+    "name": "Anycubic Predator 0.4 nozzle",
+    "inherits": "fdm_machine_common",
+    "from": "system",
+    "setting_id": "GM003",
+    "instantiation": "true",
+    "printer_model": "Anycubic Predator",
+    "default_print_profile": "0.20mm Standard @Anycubic Predator",
+    "gcode_flavor": "marlin",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "printable_area": [
+        "184.296x16.1238",
+        "182.189x32.1249",
+        "178.696x47.8815",
+        "173.843x63.2737",
+        "167.667x78.1844",
+        "160.215x92.5",
+        "151.543x106.112",
+        "141.718x118.916",
+        "130.815x130.815",
+        "118.916x141.718",
+        "106.112x151.543",
+        "92.5x160.215",
+        "78.1844x167.667",
+        "63.2737x173.843",
+        "47.8815x178.696",
+        "32.1249x182.189",
+        "16.1238x184.296",
+        "1.1328e-14x185",
+        "-16.1238x184.296",
+        "-32.1249x182.189",
+        "-47.8815x178.696",
+        "-63.2737x173.843",
+        "-78.1844x167.667",
+        "-92.5x160.215",
+        "-106.112x151.543",
+        "-118.916x141.718",
+        "-130.815x130.815",
+        "-141.718x118.916",
+        "-151.543x106.112",
+        "-160.215x92.5",
+        "-167.667x78.1844",
+        "-173.843x63.2737",
+        "-178.696x47.8815",
+        "-182.189x32.1249",
+        "-184.296x16.1238",
+        "-185x2.2656e-14",
+        "-184.296x-16.1238",
+        "-182.189x-32.1249",
+        "-178.696x-47.8815",
+        "-173.843x-63.2737",
+        "-167.667x-78.1844",
+        "-160.215x-92.5",
+        "-151.543x-106.112",
+        "-141.718x-118.916",
+        "-130.815x-130.815",
+        "-118.916x-141.718",
+        "-106.112x-151.543",
+        "-92.5x-160.215",
+        "-78.1844x-167.667",
+        "-63.2737x-173.843",
+        "-47.8815x-178.696",
+        "-32.1249x-182.189",
+        "-16.1238x-184.296",
+        "-3.39839e-14x-185",
+        "16.1238x-184.296",
+        "32.1249x-182.189",
+        "47.8815x-178.696",
+        "63.2737x-173.843",
+        "78.1844x-167.667",
+        "92.5x-160.215",
+        "106.112x-151.543",
+        "118.916x-141.718",
+        "130.815x-130.815",
+        "141.718x-118.916",
+        "151.543x-106.112",
+        "160.215x-92.5",
+        "167.667x-78.1844",
+        "173.843x-63.2737",
+        "178.696x-47.8815",
+        "182.189x-32.1249",
+        "184.296x-16.1238",
+        "185x-4.53119e-14"
+    ],
+    "printable_height": "455",
+    "machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 E-1 F300\nG1 Z+0.5  F6000\nG28 \nG90 ;absolute positioning",
+    "machine_start_gcode": "G21 ; use millimeters\nG90 ; absolute positioning\nM82 ; absolute extrusion\nM107 T0 ; turn off part cooling fan\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] T0  ; set nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed\nM109 S[nozzle_temperature_initial_layer] T0  ; wait for nozzle\n\nG28 ; home all\nG1 X0 Y0 Z5.0 F4000 ; jump to center\nG1 X-180 Y0 Z0.4 F2000 ; move to near bed edge\nG92 E0 ; reset the extruder\n\n; --- Prime line ---\nG1 E5 F300 ; initial prime\nG0 X-180.00 Y0.00 Z0.30 E0 F1000\nG1 X-179.385 Y-14.864 Z0.30 E3.57042\nG1 X-177.545 Y-29.627 Z0.30 E7.14094\nG1 X-174.492 Y-44.187 Z0.30 E10.71134\nG1 X-170.247 Y-58.446 Z0.30 E14.28195\nG1 X-164.839 Y-72.305 Z0.30 E17.85235\nG1 X-158.305 Y-85.671 Z0.30 E21.42298\nG1 X-150.690 Y-98.451 Z0.30 E24.99339\nG1 X-142.045 Y-110.558 Z0.30 E27.56379 ; gradually reducing extrusion\nG1 F1500 E26.56379 ; retract 1mm\nG1 Z0.5 F3000 ; lift Z slightly\nG92 E0 ; reset the extruder\n; --- End priming line ---",
+    "layer_change_gcode": "",
+    "machine_pause_gcode": "PAUSE",
+    "scan_first_layer": "0",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "0"
+}