Initial release

resources/profiles/Snapmaker/Snapmaker U1_bed.svg

@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="270px" height="270px" viewBox="0 0 270 270" version="1.1">
+<g id="surface1">
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 166.042969 136.941406 L 166.960938 135.988281 L 172.285156 141.527344 L 174.085938 141.527344 L 167.839844 135.105469 L 174.121094 128.578125 L 172.355469 128.578125 L 166.042969 135.105469 L 166.042969 122.902344 L 164.773438 122.902344 L 164.773438 141.527344 L 166.042969 141.527344 Z M 166.042969 136.941406 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 91.011719 135.105469 C 91.011719 132.953125 92.703125 131.191406 94.785156 131.191406 C 96.867188 131.191406 98.558594 132.953125 98.558594 135.105469 L 98.558594 141.5625 L 101.066406 141.5625 L 101.066406 135.105469 C 101.066406 131.507812 98.242188 128.542969 94.75 128.542969 C 91.257812 128.542969 88.4375 131.472656 88.4375 135.105469 L 88.4375 141.5625 L 90.941406 141.5625 L 90.941406 135.105469 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 119.195312 140.363281 C 120.253906 141.171875 121.558594 141.667969 122.972656 141.667969 C 126.464844 141.667969 129.285156 138.738281 129.285156 135.105469 C 129.285156 131.507812 126.464844 128.542969 122.972656 128.542969 C 119.480469 128.542969 116.65625 131.472656 116.65625 135.105469 L 116.65625 147.0625 L 119.160156 147.0625 L 119.160156 140.363281 Z M 122.972656 131.15625 C 125.050781 131.15625 126.746094 132.917969 126.746094 135.070312 C 126.746094 137.222656 125.050781 138.984375 122.972656 138.984375 C 120.890625 138.984375 119.195312 137.222656 119.195312 135.070312 C 119.195312 132.917969 120.890625 131.15625 122.972656 131.15625 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 156.660156 141.632812 C 158.707031 141.632812 160.539062 140.574219 161.703125 138.984375 L 161.703125 141.492188 L 162.972656 141.492188 L 162.972656 128.933594 L 161.703125 128.933594 L 161.703125 131.121094 C 160.539062 129.53125 158.707031 128.472656 156.660156 128.472656 C 153.167969 128.472656 150.34375 131.402344 150.34375 135.035156 C 150.34375 138.738281 153.167969 141.632812 156.660156 141.632812 M 156.660156 129.886719 C 159.445312 129.886719 161.703125 132.214844 161.703125 135.140625 C 161.703125 138.035156 159.445312 140.398438 156.660156 140.398438 C 153.871094 140.398438 151.613281 138.070312 151.613281 135.140625 C 151.613281 132.214844 153.871094 129.886719 156.660156 129.886719 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 174.015625 138.351562 C 175.742188 141.492188 179.625 142.550781 182.621094 140.75 C 184.632812 139.515625 185.761719 137.328125 185.796875 135.105469 L 184.457031 135.882812 C 184.246094 137.398438 183.363281 138.808594 182.023438 139.621094 C 179.800781 140.960938 176.976562 140.328125 175.460938 138.246094 L 182.164062 134.257812 L 184.140625 133.058594 L 185.269531 132.425781 C 185.199219 132.25 185.089844 132.035156 184.984375 131.859375 C 183.257812 128.722656 179.375 127.664062 176.378906 129.460938 C 173.308594 131.226562 172.285156 135.246094 174.015625 138.351562 M 176.976562 130.554688 C 179.199219 129.214844 182.023438 129.851562 183.539062 131.929688 L 174.863281 137.117188 C 173.875 134.71875 174.71875 131.929688 176.976562 130.554688 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 187.171875 135.105469 L 187.171875 141.5625 L 188.441406 141.5625 L 188.441406 135.140625 C 188.441406 132.25 190.699219 129.921875 193.488281 129.921875 L 193.488281 128.613281 C 189.960938 128.578125 187.171875 131.472656 187.171875 135.105469 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 81.488281 136.269531 C 83.496094 136.445312 84.730469 137.257812 84.660156 137.964844 C 84.589844 138.597656 83.566406 138.949219 82.4375 138.984375 C 81.453125 139.019531 79.546875 138.984375 77.535156 138.246094 C 77.394531 138.597656 76.867188 139.9375 76.617188 140.503906 C 77.113281 140.75 79.6875 141.949219 83.003906 141.632812 C 86.144531 141.351562 88.011719 139.199219 87.765625 137.503906 C 87.34375 134.117188 82.96875 134.011719 81.0625 133.695312 C 79.933594 133.484375 79.265625 132.8125 79.371094 132.25 C 79.511719 131.472656 80.710938 131.226562 82.332031 131.15625 C 84.484375 131.085938 86.285156 131.859375 86.285156 131.859375 C 86.285156 131.859375 86.953125 130.238281 87.203125 129.636719 C 85.296875 128.722656 83.320312 128.507812 82.332031 128.507812 C 79.015625 128.507812 76.511719 130.34375 76.511719 132.390625 C 76.511719 134.578125 79.015625 136.023438 81.488281 136.269531 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 108.542969 141.632812 C 109.953125 141.632812 111.292969 141.136719 112.316406 140.328125 L 112.316406 141.527344 L 114.824219 141.527344 L 114.824219 128.96875 L 112.316406 128.96875 L 112.316406 129.886719 C 111.257812 129.074219 109.953125 128.578125 108.542969 128.578125 C 105.050781 128.578125 102.230469 131.507812 102.230469 135.140625 C 102.230469 138.738281 105.015625 141.632812 108.542969 141.632812 M 108.542969 131.15625 C 110.625 131.15625 112.316406 132.917969 112.316406 135.070312 C 112.316406 137.222656 110.625 138.984375 108.542969 138.984375 C 106.460938 138.984375 104.769531 137.222656 104.769531 135.070312 C 104.734375 132.917969 106.425781 131.15625 108.542969 131.15625 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 131.789062 133.800781 C 131.789062 131.648438 133.484375 129.886719 135.5625 129.886719 C 137.644531 129.886719 139.339844 131.648438 139.339844 133.800781 L 139.339844 141.5625 L 140.609375 141.5625 L 140.609375 133.800781 C 140.609375 131.648438 142.300781 129.886719 144.382812 129.886719 C 146.464844 129.886719 148.15625 131.648438 148.15625 133.800781 L 148.15625 141.5625 L 149.429688 141.5625 L 149.429688 133.730469 C 149.390625 130.871094 147.171875 128.578125 144.382812 128.578125 C 142.476562 128.578125 140.820312 129.671875 139.9375 131.296875 C 139.058594 129.671875 137.433594 128.578125 135.492188 128.578125 C 132.707031 128.578125 130.484375 130.871094 130.449219 133.730469 L 130.449219 141.5625 L 131.71875 141.5625 L 131.71875 133.800781 Z M 131.789062 133.800781 "/>
+</g>
+</svg>

resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma CoPE @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM016",
+    "instantiation": "false",
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_density": [
+        "1.29"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "58"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma CoPE @U1",
+    "inherits": "Panchroma CoPE @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM016_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1 base.json

@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM001",
+    "instantiation": "false",
+    "filament_cost": [
+        "19.99"
+    ],
+    "filament_density": [
+        "1.32"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "filament_wipe": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "58"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA @U1",
+    "inherits": "Panchroma PLA @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM001_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Celestial @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM008",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Celestial @U1",
+    "inherits": "Panchroma PLA Celestial @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM008_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Galaxy @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM007",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Galaxy @U1",
+    "inherits": "Panchroma PLA Galaxy @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM007_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Glow @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM010",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Glow @U1",
+    "inherits": "Panchroma PLA Glow @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM010_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Luminous @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM011",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Luminous @U1",
+    "inherits": "Panchroma PLA Luminous @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM011_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Marble @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM003",
+    "instantiation": "false",
+    "filament_cost": [
+        "21.99"
+    ],
+    "filament_density": [
+        "1.31"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Marble @U1",
+    "inherits": "Panchroma PLA Marble @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM003_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Matte @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM002",
+    "instantiation": "false",
+    "filament_cost": [
+        "20.99"
+    ],
+    "filament_density": [
+        "1.31"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Matte @U1",
+    "inherits": "Panchroma PLA Matte @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM002_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Metallic @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM012",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Metallic @U1",
+    "inherits": "Panchroma PLA Metallic @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM012_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Neon @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM013",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Neon @U1",
+    "inherits": "Panchroma PLA Neon @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM013_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1 base.json

@@ -0,0 +1,42 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Satin @U1 base",
+    "renamed_from": "Panchroma PLA Stain @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM005",
+    "instantiation": "false",
+    "filament_cost": [
+        "20.99"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "59"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1.json

@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Satin @U1",
+    "renamed_from": "Panchroma PLA Stain @U1",
+    "inherits": "Panchroma PLA Satin @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM005_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Silk @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM004",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.31"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "58"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Silk @U1",
+    "inherits": "Panchroma PLA Silk @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM004_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Starlight @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM009",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Starlight @U1",
+    "inherits": "Panchroma PLA Starlight @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM009_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Temp Shift @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM015",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Temp Shift @U1",
+    "inherits": "Panchroma PLA Temp Shift @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM015_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Translucent @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM006",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA Translucent @U1",
+    "inherits": "Panchroma PLA Translucent @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM006_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA UV Shift @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM014",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Panchroma PLA UV Shift @U1",
+    "inherits": "Panchroma PLA UV Shift @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM014_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json

@@ -0,0 +1,19 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyLite Dual PLA @0.2 nozzle",
+  "setting_id": "490991920",
+  "inherits": "PolyLite PLA @0.2 nozzle",
+  "compatible_printers": [
+    "Snapmaker A250 Dual (0.2 nozzle)",
+    "Snapmaker A250 Dual BKit (0.2 nozzle)",
+    "Snapmaker A250 Dual QS+B Kit (0.2 nozzle)",
+    "Snapmaker A250 Dual QSKit (0.2 nozzle)",
+    "Snapmaker A350 Dual (0.2 nozzle)",
+    "Snapmaker A350 Dual BKit (0.2 nozzle)",
+    "Snapmaker A350 Dual QS+B Kit (0.2 nozzle)",
+    "Snapmaker A350 Dual QSKit (0.2 nozzle)",
+    "Snapmaker Artisan (0.2 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json

@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyLite J1 PLA @0.2 nozzle",
+  "setting_id": "431382384",
+  "inherits": "PolyLite PLA @0.2 nozzle",
+  "compatible_printers": [
+    "Snapmaker J1 (0.2 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json

@@ -0,0 +1,13 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyLite J1 PLA",
+  "setting_id": "116125055",
+  "inherits": "PolyLite PLA @base",
+  "compatible_printers": [
+    "Snapmaker J1 (0.4 nozzle)",
+    "Snapmaker J1 (0.6 nozzle)",
+    "Snapmaker J1 (0.8 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json

@@ -0,0 +1,29 @@
+{
+    "filament_density": [
+        "1.25"
+    ],
+    "temp_min": [
+        "230"
+    ],
+    "temp_max": [
+        "240"
+    ],
+    "temperture_vitrification": [
+        "75"
+    ],
+    "idle_temperture": [
+        "0"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "description": "",
+    "inherits": "fdm_filament_petg",
+    "name": "PolyLite PETG @Base",
+    "type": "filament",
+    "instantiation": "false",
+    "from": "system",
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json

@@ -0,0 +1,117 @@
+{
+    "type": "filament",
+    "name": "PolyLite PETG @Snapmaker U1",
+    "from": "system",
+    "instantiation": "true",
+    "cool_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "80"
+    ],
+    "textured_plate_temp": [
+        "80"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "0.92"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "7.5"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "81"
+    ],
+    "filament_id": "PMPE04",
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "supertack_plate_temp": [
+        "70"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "70"
+    ],
+    "setting_id": "PMPE04_U1",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "pressure_advance": [
+        "0.05"
+    ],
+    "inherits": "PolyLite PETG @Base"
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json

@@ -0,0 +1,21 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyLite PLA @0.2 nozzle",
+  "setting_id": "1592803578",
+  "inherits": "PolyLite PLA @base",
+  "compatible_printers": [
+    "Snapmaker A250 (0.2 nozzle)",
+    "Snapmaker A250 BKit (0.2 nozzle)",
+    "Snapmaker A250 QS+B Kit (0.2 nozzle)",
+    "Snapmaker A250 QSKit (0.2 nozzle)",
+    "Snapmaker A350 (0.2 nozzle)",
+    "Snapmaker A350 BKit (0.2 nozzle)",
+    "Snapmaker A350 QS+B Kit (0.2 nozzle)",
+    "Snapmaker A350 QSKit (0.2 nozzle)"
+  ],
+  "filament_max_volumetric_speed": [
+    "1.6"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1 base.json

@@ -0,0 +1,20 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "PolyLite PLA @U1 base",
+  "filament_id": "13938660340",
+  "inherits": "fdm_filament_pla",
+  "filament_flow_ratio": [
+    "0.95"
+  ],
+  "filament_cost": [
+    "90"
+  ],
+  "filament_max_volumetric_speed": [
+    "15"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1.json

@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyLite PLA @U1",
+  "setting_id": "6486836500",
+  "inherits": "PolyLite PLA @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json

@@ -0,0 +1,20 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "PolyLite PLA @base",
+  "filament_id": "1393866034",
+  "inherits": "fdm_filament_pla",
+  "filament_flow_ratio": [
+    "0.95"
+  ],
+  "filament_cost": [
+    "90"
+  ],
+  "filament_max_volumetric_speed": [
+    "15"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1 base.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "PolyLite PLA Pro @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM019",
+    "instantiation": "false",
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.22"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "220"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "62"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "PolyLite PLA Pro @U1",
+    "inherits": "PolyLite PLA Pro @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM019_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json

@@ -0,0 +1,19 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyTerra Dual PLA @0.2 nozzle",
+  "setting_id": "1258531391",
+  "inherits": "PolyTerra PLA @0.2 nozzle",
+  "compatible_printers": [
+    "Snapmaker A250 Dual (0.2 nozzle)",
+    "Snapmaker A250 Dual BKit (0.2 nozzle)",
+    "Snapmaker A250 Dual QS+B Kit (0.2 nozzle)",
+    "Snapmaker A250 Dual QSKit (0.2 nozzle)",
+    "Snapmaker A350 Dual (0.2 nozzle)",
+    "Snapmaker A350 Dual BKit (0.2 nozzle)",
+    "Snapmaker A350 Dual QS+B Kit (0.2 nozzle)",
+    "Snapmaker A350 Dual QSKit (0.2 nozzle)",
+    "Snapmaker Artisan (0.2 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json

@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyTerra J1 PLA @0.2 nozzle",
+  "setting_id": "1072374370",
+  "inherits": "PolyTerra PLA @0.2 nozzle",
+  "compatible_printers": [
+    "Snapmaker J1 (0.2 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json

@@ -0,0 +1,13 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyTerra J1 PLA",
+  "setting_id": "3958200796",
+  "inherits": "PolyTerra PLA @base",
+  "compatible_printers": [
+    "Snapmaker J1 (0.4 nozzle)",
+    "Snapmaker J1 (0.6 nozzle)",
+    "Snapmaker J1 (0.8 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json

@@ -0,0 +1,21 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyTerra PLA @0.2 nozzle",
+  "setting_id": "409934824",
+  "inherits": "PolyTerra PLA @base",
+  "compatible_printers": [
+    "Snapmaker A250 (0.2 nozzle)",
+    "Snapmaker A250 BKit (0.2 nozzle)",
+    "Snapmaker A250 QS+B Kit (0.2 nozzle)",
+    "Snapmaker A250 QSKit (0.2 nozzle)",
+    "Snapmaker A350 (0.2 nozzle)",
+    "Snapmaker A350 BKit (0.2 nozzle)",
+    "Snapmaker A350 QS+B Kit (0.2 nozzle)",
+    "Snapmaker A350 QSKit (0.2 nozzle)"
+  ],
+  "filament_max_volumetric_speed": [
+    "1.4"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1 base.json

@@ -0,0 +1,20 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "PolyTerra PLA @U1 base",
+  "filament_id": "37895926870",
+  "inherits": "fdm_filament_pla",
+  "filament_cost": [
+    "80"
+  ],
+  "filament_density": [
+    "1.31"
+  ],
+  "filament_max_volumetric_speed": [
+    "14.4"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1.json

@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyTerra PLA @U1",
+  "setting_id": "12580059400",
+  "inherits": "PolyTerra PLA @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json

@@ -0,0 +1,29 @@
+{
+    "filament_density": [
+        "1.28"
+    ],
+    "temp_min": [
+        "210"
+    ],
+    "temp_max": [
+        "230"
+    ],
+    "temperture_vitrification": [
+        "156"
+    ],
+    "idle_temperture": [
+        "0"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "description": "",
+    "inherits": "fdm_filament_pla",
+    "name": "Polymaker HT-PLA @Base",
+    "type": "filament",
+    "instantiation": "false",
+    "from": "system",
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json

@@ -0,0 +1,96 @@
+{
+    "type": "filament",
+    "name": "Polymaker HT-PLA @Snapmaker U1",
+    "from": "system",
+    "instantiation": "true",
+    "cool_plate_temp": [
+        "50"
+    ],
+    "eng_plate_temp": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp": [
+        "50"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "50"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "50"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "50"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "slow_down_min_speed": [
+        "5"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "setting_id": "PMPL02_U1",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "inherits": "Polymaker HT-PLA @Base",
+    "filament_id": "PMPL02"
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1 base.json

@@ -0,0 +1,53 @@
+{
+    "type": "filament",
+    "name": "Polymaker HT-PLA @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM017",
+    "instantiation": "false",
+    "filament_cost": [
+        "26.99"
+    ],
+    "filament_density": [
+        "1.28"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Polymaker HT-PLA @U1",
+    "inherits": "Polymaker HT-PLA @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM017_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json

@@ -0,0 +1,29 @@
+{
+    "filament_density": [
+        "1.34"
+    ],
+    "temp_min": [
+        "210"
+    ],
+    "temp_max": [
+        "230"
+    ],
+    "temperture_vitrification": [
+        "148"
+    ],
+    "idle_temperture": [
+        "0"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "description": "",
+    "inherits": "fdm_filament_pla",
+    "name": "Polymaker HT-PLA-GF @Base",
+    "type": "filament",
+    "instantiation": "false",
+    "from": "system",
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json

@@ -0,0 +1,96 @@
+{
+    "type": "filament",
+    "name": "Polymaker HT-PLA-GF @Snapmaker U1",
+    "from": "system",
+    "instantiation": "true",
+    "cool_plate_temp": [
+        "50"
+    ],
+    "eng_plate_temp": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp": [
+        "50"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "50"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "50"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "50"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "slow_down_min_speed": [
+        "5"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "setting_id": "PMPL01_U1",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "inherits": "Polymaker HT-PLA-GF @Base",
+    "filament_id": "PMPL01"
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1 base.json

@@ -0,0 +1,53 @@
+{
+    "type": "filament",
+    "name": "Polymaker HT-PLA-GF @U1 base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFPM018",
+    "instantiation": "false",
+    "filament_cost": [
+        "32.99"
+    ],
+    "filament_density": [
+        "1.34"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Polymaker HT-PLA-GF @U1",
+    "inherits": "Polymaker HT-PLA-GF @U1 base",
+    "from": "system",
+    "setting_id": "GFSPM018_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json

@@ -0,0 +1,29 @@
+{
+    "filament_density": [
+        "1.3"
+    ],
+    "temp_min": [
+        "240"
+    ],
+    "temp_max": [
+        "260"
+    ],
+    "temperture_vitrification": [
+        "75"
+    ],
+    "idle_temperture": [
+        "0"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "description": "",
+    "inherits": "fdm_filament_petg",
+    "name": "Polymaker PETG @Base",
+    "type": "filament",
+    "instantiation": "false",
+    "from": "system",
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json

@@ -0,0 +1,111 @@
+{
+    "type": "filament",
+    "name": "Polymaker PETG @Snapmaker U1",
+    "from": "system",
+    "instantiation": "true",
+    "cool_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "80"
+    ],
+    "textured_plate_temp": [
+        "80"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "10"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "71"
+    ],
+    "filament_id": "PMPE01",
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "supertack_plate_temp": [
+        "70"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "70"
+    ],
+    "setting_id": "PMPE01_U1",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "inherits": "Polymaker PETG @Base"
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json

@@ -0,0 +1,29 @@
+{
+    "filament_density": [
+        "1.23"
+    ],
+    "temp_min": [
+        "190"
+    ],
+    "temp_max": [
+        "230"
+    ],
+    "temperture_vitrification": [
+        "55"
+    ],
+    "idle_temperture": [
+        "0"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "description": "",
+    "inherits": "fdm_filament_pla",
+    "name": "Polymaker PLA Pro @Base",
+    "type": "filament",
+    "instantiation": "false",
+    "from": "system",
+    "filament_vendor": [
+        "Polymaker"
+    ]
+}

resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json

@@ -0,0 +1,96 @@
+{
+    "type": "filament",
+    "name": "Polymaker PLA Pro @Snapmaker U1",
+    "from": "system",
+    "instantiation": "true",
+    "cool_plate_temp": [
+        "50"
+    ],
+    "eng_plate_temp": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp": [
+        "50"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "50"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "50"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "50"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "slow_down_min_speed": [
+        "5"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "61"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "setting_id": "PMPL03_U1",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "inherits": "Polymaker PLA Pro @Base",
+    "filament_id": "PMPL03"
+}

resources/profiles/Snapmaker/filament/Snapmaker ABS @0.2 nozzle.json

@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ABS @0.2 nozzle",
+    "inherits": "Snapmaker ABS @base",
+    "from": "system",
+    "setting_id": "363717724",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker A250 (0.2 nozzle)",
+        "Snapmaker A250 BKit (0.2 nozzle)",
+        "Snapmaker A250 QS+B Kit (0.2 nozzle)",
+        "Snapmaker A250 QSKit (0.2 nozzle)",
+        "Snapmaker A350 (0.2 nozzle)",
+        "Snapmaker A350 BKit (0.2 nozzle)",
+        "Snapmaker A350 QS+B Kit (0.2 nozzle)",
+        "Snapmaker A350 QSKit (0.2 nozzle)"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ]
+}

resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json

@@ -0,0 +1,59 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ABS @U1 base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "1682237920",
+    "instantiation": "false",
+    "filament_end_gcode": [
+        ""
+    ],
+    "hot_plate_temp": [
+        "110"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "105"
+    ],
+    "overhang_fan_speed": [
+        "20"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_loading_speed_start": [
+        "35"
+    ],
+    "filament_loading_speed": [
+        "35"
+    ],
+    "filament_unloading_speed_start": [
+        "35"
+    ],
+    "filament_unloading_speed": [
+        "35"
+    ],
+    "filament_load_time": [
+        "2"
+    ],
+    "filament_unload_time": [
+        "2"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_cooling_initial_speed": [
+        "35"
+    ],
+    "filament_cooling_final_speed": [
+        "60"
+    ],
+    "fan_max_speed": [
+        "15"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ]
+}

resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ABS @U1",
+    "inherits": "Snapmaker ABS @U1 base",
+    "from": "system",
+    "setting_id": "937533070",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ]
+}

resources/profiles/Snapmaker/filament/Snapmaker ABS @base.json

@@ -0,0 +1,8 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ABS @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "3811508002",
+    "instantiation": "false"
+}

resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json

@@ -0,0 +1,62 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ABS Benchy @U1",
+    "inherits": "Snapmaker ABS @U1 base",
+    "from": "system",
+    "setting_id": "35407544770",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "compatible_prints": [
+        "0.25 Benchy @Snapmaker U1 (0.4 nozzle)"
+    ],
+    "overhang_fan_speed": [
+        "35"
+    ],
+    "slow_down_for_layer_cooling": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "2"
+    ],
+    "filament_deretraction_speed": [
+        "55"
+    ],
+    "filament_max_volumetric_speed": [
+        "31"
+    ],
+    "filament_retract_when_changing_layer": [
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.5"
+    ],
+    "filament_z_hop": [
+        "0"
+    ],
+    "filament_retraction_speed": [
+        "55"
+    ],
+    "filament_wipe": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "35"
+    ],
+    "slow_down_min_speed": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "0"
+    ],
+    "default_filament_colour": [
+        ""
+    ]
+}

resources/profiles/Snapmaker/filament/Snapmaker ABS.json

@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ABS",
+    "inherits": "Snapmaker ABS @base",
+    "from": "system",
+    "setting_id": "536148164",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker A250 (0.4 nozzle)",
+        "Snapmaker A250 (0.6 nozzle)",
+        "Snapmaker A250 (0.8 nozzle)",
+        "Snapmaker A250 BKit (0.4 nozzle)",
+        "Snapmaker A250 BKit (0.6 nozzle)",
+        "Snapmaker A250 BKit (0.8 nozzle)",
+        "Snapmaker A250 QS+B Kit (0.4 nozzle)",
+        "Snapmaker A250 QS+B Kit (0.6 nozzle)",
+        "Snapmaker A250 QS+B Kit (0.8 nozzle)",
+        "Snapmaker A250 QSKit (0.4 nozzle)",
+        "Snapmaker A250 QSKit (0.6 nozzle)",
+        "Snapmaker A250 QSKit (0.8 nozzle)",
+        "Snapmaker A350 (0.4 nozzle)",
+        "Snapmaker A350 (0.6 nozzle)",
+        "Snapmaker A350 (0.8 nozzle)",
+        "Snapmaker A350 BKit (0.4 nozzle)",
+        "Snapmaker A350 BKit (0.6 nozzle)",
+        "Snapmaker A350 BKit (0.8 nozzle)",
+        "Snapmaker A350 QS+B Kit (0.4 nozzle)",
+        "Snapmaker A350 QS+B Kit (0.6 nozzle)",
+        "Snapmaker A350 QS+B Kit (0.8 nozzle)",
+        "Snapmaker A350 QSKit (0.4 nozzle)",
+        "Snapmaker A350 QSKit (0.6 nozzle)",
+        "Snapmaker A350 QSKit (0.8 nozzle)"
+    ]
+}

resources/profiles/Snapmaker/filament/Snapmaker ASA @0.2 nozzle.json

@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ASA @0.2 nozzle",
+    "inherits": "Snapmaker ASA @base",
+    "from": "system",
+    "setting_id": "978004695",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Snapmaker A250 (0.2 nozzle)",
+        "Snapmaker A250 BKit (0.2 nozzle)",
+        "Snapmaker A250 QS+B Kit (0.2 nozzle)",
+        "Snapmaker A250 QSKit (0.2 nozzle)",
+        "Snapmaker A350 (0.2 nozzle)",
+        "Snapmaker A350 BKit (0.2 nozzle)",
+        "Snapmaker A350 QS+B Kit (0.2 nozzle)",
+        "Snapmaker A350 QSKit (0.2 nozzle)"
+    ],
+    "filament_max_volumetric_speed": [
+        "2.4"
+    ]
+}

resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json

@@ -0,0 +1,56 @@
+{
+    "type": "filament",
+    "name": "Snapmaker ASA @U1 base",
+    "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "12471727060",
+    "instantiation": "false",
+    "filament_end_gcode": [
+        ""
+    ],
+    "hot_plate_temp": [
+        "110"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "15"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_loading_speed_start": [
+        "35"
+    ],
+    "filament_loading_speed": [
+        "35"
+    ],
+    "filament_unloading_speed_start": [
+        "35"
+    ],
+    "filament_unloading_speed": [
+        "35"
+    ],
+    "filament_load_time": [
+        "2"
+    ],
+    "filament_unload_time": [
+        "2"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_cooling_initial_speed": [
+        "35"
+    ],
+    "filament_cooling_final_speed": [
+        "60"
+    ],
+    "fan_max_speed": [
+        "15"
+    ],
+    "fan_min_speed": [
+        "0"
+    ]
+}