Initial release

resources/profiles/M3D/process/0.20mm MM @D8500.json

@@ -0,0 +1,46 @@
+{
+    "type": "process",
+    "name": "0.20mm MM @D8500",
+    "inherits": "fdm_process_common",
+    "from": "system",
+    "instantiation": "true",
+    "compatible_printers": [
+        "M3D Enabler D8500 MM"
+    ],
+    "brim_type": "no_brim",
+    "support_object_first_layer_gap": "1",
+    "support_object_xy_distance": "0.5",
+    "bridge_acceleration": "50%",
+    "default_acceleration": "1000",
+    "initial_layer_acceleration": "500",
+    "inner_wall_acceleration": "1000",
+    "internal_solid_infill_acceleration": "100%",
+    "outer_wall_acceleration": "1000",
+    "sparse_infill_acceleration": "100%",
+    "top_surface_acceleration": "1000",
+    "travel_acceleration": "1000",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "1",
+    "enable_support": "1",
+    "filename_format": "{input_filename_base}_{print_time}.gcode",
+    "gap_infill_speed": "60",
+    "initial_layer_speed": "35",
+    "inner_wall_line_width": "0.4",
+    "inner_wall_speed": "90",
+    "internal_solid_infill_speed": "60",
+    "layer_height": "0.2",
+    "outer_wall_speed": "45",
+    "prime_tower_brim_width": "1",
+    "prime_tower_width": "40",
+    "prime_volume": "30",
+    "slow_down_layers": "1",
+    "sparse_infill_density": "5%",
+    "sparse_infill_speed": "60",
+    "support_interface_speed": "30",
+    "support_type": "normal(manual)",
+    "top_surface_speed": "40",
+    "travel_speed": "100",
+    "wall_loops": "2",
+    "wipe_tower_extra_spacing": "200%",
+    "wipe_tower_filament": "2"
+}