Initial release

resources/profiles/Kingroon/machine/Kingroon KLP1 0.4 nozzle.json

@@ -0,0 +1,125 @@
+{
+    "type": "machine",
+    "name": "Kingroon KLP1 0.4 nozzle",
+    "inherits": "fdm_klipper_common",
+    "from": "system",
+    "setting_id": "GM003",
+    "instantiation": "true",
+    "printer_model": "Kingroon KLP1",
+    "default_filament_profile": "Generic PLA @System",
+    "default_print_profile": "0.20mm Standard @Kingroon KLP1",
+    "thumbnails": [
+        "100x100"
+    ],
+    "change_filament_gcode": "",
+    "deretraction_speed": [
+        "90"
+    ],
+    "enable_filament_ramming": "1",
+    "extra_loading_move": "-2",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_radius": "65",
+    "high_current_on_filament_swap": "0",
+    "machine_unload_filament_time": "0",
+    "min_layer_height": "0.08",
+    "parking_pos_retraction": "92",
+    "purge_in_prime_tower": "1",
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_end_gcode": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y200 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y200 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "5000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "50",
+        "12"
+    ],
+    "machine_pause_gcode": "PAUSE",
+    "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG28 ; h1ome all axes\n M117 ;Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "retraction_length": [
+        "1"
+    ],
+    "retraction_speed": [
+        "90"
+    ],
+    "use_firmware_retraction": "0",
+    "wipe": [
+        "1"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "printable_area": [
+        "0x0",
+        "230x0",
+        "230x230",
+        "0x230"
+    ],
+    "printable_height": "210",
+    "nozzle_diameter": [
+        "0.4"
+    ]
+}

resources/profiles/Kingroon/machine/Kingroon KLP1.json

@@ -0,0 +1,10 @@
+{
+    "type": "machine_model",
+    "name": "Kingroon KLP1",
+    "model_id": "Kingroon KLP1",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Kingroon",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}

resources/profiles/Kingroon/machine/Kingroon KP3S 3.0 0.4 nozzle.json

@@ -0,0 +1,98 @@
+{
+    "type": "machine",
+    "name": "Kingroon KP3S 3.0 0.4 nozzle",
+    "inherits": "fdm_machine_common",
+    "from": "system",
+    "setting_id": "GM003",
+    "instantiation": "true",
+    "printer_model": "Kingroon KP3S 3.0",
+    "default_print_profile": "0.30mm Standard @Kingroon KP3S 3.0",
+    "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors",
+    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\n M117 Purge extruder\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "cooling_tube_length": "0",
+    "cooling_tube_retraction": "0",
+    "enable_filament_ramming": "0",
+    "extra_loading_move": "0",
+    "fan_speedup_overhangs": "0",
+    "fan_speedup_time": "1",
+    "machine_max_acceleration_e": [
+        "10000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000",
+        "9000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "10000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "4000",
+        "9000"
+    ],
+    "machine_max_acceleration_y": [
+        "4000",
+        "9000"
+    ],
+    "machine_max_acceleration_z": [
+        "1100",
+        "100"
+    ],
+    "machine_max_speed_e": [
+        "50",
+        "60"
+    ],
+    "machine_max_speed_x": [
+        "300",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "300",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "12"
+    ],
+    "manual_filament_change": "1",
+    "min_layer_height": [
+        "0.1"
+    ],
+    "nozzle_type": "brass",
+    "parking_pos_retraction": "0",
+    "printable_area": [
+        "0x0",
+        "180x0",
+        "180x180",
+        "0x180"
+    ],
+    "printable_height": "180",
+    "purge_in_prime_tower": "0",
+    "retract_length_toolchange": [
+        "0.5"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.3"
+    ],
+    "retraction_minimum_travel": [
+        "3"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "support_air_filtration": "0",
+    "support_chamber_temp_control": "0",
+    "wipe": [
+        "1"
+    ],
+    "z_hop": [
+        "0.2"
+    ]
+}

resources/profiles/Kingroon/machine/Kingroon KP3S 3.0.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Kingroon KP3S 3.0",
+    "model_id": "Kingroon KP3S 3.0",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Kingroon",
+    "bed_model": "kp3s_bed.stl",
+    "bed_texture": "Kingroon_buildplate.png",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}

resources/profiles/Kingroon/machine/Kingroon KP3S PRO S1 0.4 nozzle.json

@@ -0,0 +1,14 @@
+{
+    "type": "machine",
+    "name": "Kingroon KP3S PRO S1 0.4 nozzle",
+    "inherits": "fdm_machine_common",
+    "setting_id": "GM003",
+    "instantiation": "true",
+    "printer_model": "Kingroon KP3S PRO S1",
+    "default_print_profile": "0.20mm Standard @Kingroon KP3S PRO S1",
+    "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors",
+    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\n M117 Purge extruder\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface",
+    "nozzle_diameter": [
+        "0.4"
+    ]
+}

resources/profiles/Kingroon/machine/Kingroon KP3S PRO S1.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Kingroon KP3S PRO S1",
+    "model_id": "Kingroon-KP3S-PRO-S1",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Kingroon",
+    "bed_model": "kp3s_bed.stl",
+    "bed_texture": "Kingroon_buildplate.png",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}

resources/profiles/Kingroon/machine/Kingroon KP3S PRO V2 0.4 nozzle.json

@@ -0,0 +1,86 @@
+{
+    "type": "machine",
+    "name": "Kingroon KP3S PRO V2 0.4 nozzle",
+    "inherits": "fdm_klipper_common",
+    "from": "system",
+    "setting_id": "GM003",
+    "instantiation": "true",
+    "printer_model": "Kingroon KP3S PRO V2",
+    "default_filament_profile": "Generic PLA @System",
+    "default_print_profile": "0.20mm Standard @Kingroon KP3S PRO V2",
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "deretraction_speed": [
+        "45"
+    ],
+    "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y200 F6000 ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+20, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nEND_PRINT",
+    "machine_max_acceleration_e": [
+        "10000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000",
+        "9000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "10000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000",
+        "9000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000",
+        "9000"
+    ],
+    "machine_max_acceleration_z": [
+        "10000",
+        "100"
+    ],
+    "machine_max_jerk_e": [
+        "20",
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "20",
+        "7"
+    ],
+    "machine_max_jerk_y": [
+        "20",
+        "7"
+    ],
+    "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\nCANCEL_POWEROFF\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG92 E0",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retraction_speed": [
+        "45"
+    ],
+    "use_firmware_retraction": "1",
+    "wipe": [
+        "0"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "printable_area": [
+        "0x0",
+        "205x0",
+        "205x205",
+        "0x205"
+    ],
+    "printable_height": "200",
+    "nozzle_diameter": [
+        "0.4"
+    ]
+}

resources/profiles/Kingroon/machine/Kingroon KP3S PRO V2.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Kingroon KP3S PRO V2",
+    "model_id": "Kingroon-KP3S-PRO-V2",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Kingroon",
+    "bed_model": "kp3s_bed.stl",
+    "bed_texture": "Kingroon_buildplate.png",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}

resources/profiles/Kingroon/machine/Kingroon KP3S V1 0.4 nozzle.json

@@ -0,0 +1,151 @@
+{
+    "type": "machine",
+    "name": "Kingroon KP3S V1 0.4 nozzle",
+    "inherits": "fdm_klipper_common",
+    "from": "system",
+    "setting_id": "GM003",
+    "instantiation": "true",
+    "printer_model": "Kingroon KP3S V1",
+    "default_filament_profile": "Generic PLA @System",
+    "default_print_profile": "0.20mm Standard @Kingroon KP3S V1",
+    "thumbnails": [
+        "100x100"
+    ],
+    "change_filament_gcode": "",
+    "best_object_pos": "0.5,0.5",
+    "change_extrusion_role_gcode": "",
+    "cooling_tube_length": "0",
+    "cooling_tube_retraction": "0",
+    "deretraction_speed": [
+        "30"
+    ],
+    "disable_m73": "0",
+    "emit_machine_limits_to_gcode": "1",
+    "enable_filament_ramming": "0",
+    "head_wrap_detect_zone": [],
+    "enable_long_retraction_when_cut": "0",
+    "long_retractions_when_cut": [
+        "0"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_distances_when_cut": [
+        "18"
+    ],
+    "extra_loading_move": "0",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_radius": "65",
+    "high_current_on_filament_swap": "0",
+    "machine_unload_filament_time": "0",
+    "min_layer_height": "0.08",
+    "parking_pos_retraction": "0",
+    "preferred_orientation": "0",
+    "printing_by_object_gcode": "",
+    "purge_in_prime_tower": "0",
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_end_gcode": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y180 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y180 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_pause_gcode": "PAUSE",
+    "machine_start_gcode": "M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nM83\nG28 ; h1ome all axes\nG1 Z0.2                                   ; lift nozzle a bit \nG92 E0 \nG1 Y-3 F2400   \nG1 X50 F2400                                  ; zero the extruded length \nG1 X115  E40 F500                       ; Extrude 25mm of filament in a 5cm line. \nG92 E0                                     ; zero the extruded length again \nG1 E-0.2 F3000                                ; Retract a little \nG1 X180 F4000                              ; Quickly wipe away from the filament line\nM117",
+    "manual_filament_change": "0",
+    "nozzle_height": "4",
+    "nozzle_type": "brass",
+    "max_layer_height": [
+        "0.32"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "support_air_filtration": "1",
+    "support_chamber_temp_control": "1",
+    "support_multi_bed_types": "0",
+    "use_firmware_retraction": "0",
+    "wipe": [
+        "1"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "z_offset": "0",
+    "printable_area": [
+        "0x0",
+        "180x0",
+        "180x180",
+        "0x180"
+    ],
+    "printable_height": "180",
+    "nozzle_diameter": [
+        "0.4"
+    ]
+}

resources/profiles/Kingroon/machine/Kingroon KP3S V1.json

@@ -0,0 +1,10 @@
+{
+    "type": "machine_model",
+    "name": "Kingroon KP3S V1",
+    "model_id": "Kingroon KP3S V1",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Kingroon",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}

resources/profiles/Kingroon/machine/fdm_klipper_common.json

@@ -0,0 +1,106 @@
+{
+    "type": "machine",
+    "name": "fdm_klipper_common",
+    "inherits": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "gcode_flavor": "klipper",
+    "machine_max_acceleration_extruding": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_y": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_e": [
+        "60",
+        "60"
+    ],
+    "machine_max_speed_x": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "500",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_e": [
+        "5",
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "7",
+        "7"
+    ],
+    "machine_max_jerk_y": [
+        "7",
+        "7"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "min_layer_height": [
+        "0.05"
+    ],
+    "extruder_clearance_radius": "45",
+    "extruder_clearance_height_to_rod": "25",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "1.0"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "z_hop_types": "Normal Lift",
+    "machine_pause_gcode": "M601",
+    "wipe": [
+        "1"
+    ],
+    "bed_exclude_area": [
+        "0x0"
+    ],
+    "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n"
+}

resources/profiles/Kingroon/machine/fdm_machine_common.json

@@ -0,0 +1,174 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "auxiliary_fan": "0",
+    "fan_kickstart": "0",
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "gcode_flavor": "marlin",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_pause_gcode": "M601",
+    "machine_end_gcode": "",
+    "extruder_colour": [
+        "#018001"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "template_custom_gcode": "",
+    "thumbnails": [
+        "300x300"
+    ],
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "1",
+    "machine_load_filament_time": "0",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "1250",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1250",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "3000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "3000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "200",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "4.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "120",
+        "25"
+    ],
+    "machine_max_speed_x": [
+        "200",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "200",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printhost_apikey": "",
+    "printhost_authorization_type": "key",
+    "printhost_cafile": "",
+    "printhost_password": "",
+    "printhost_port": "",
+    "printhost_ssl_ignore_revoke": "0",
+    "printhost_user": "",
+    "printable_height": "200",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "200x0",
+        "200x200",
+        "0x200"
+    ],
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_length_toolchange": [
+        "2"
+    ],
+    "nozzle_hrc": "0",
+    "nozzle_type": "undefine",
+    "nozzle_volume": "0",
+    "print_host": "",
+    "print_host_webui": "",
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "0"
+    ],
+    "retraction_length": [
+        "1.4"
+    ],
+    "retraction_speed": [
+        "35"
+    ],
+    "scan_first_layer": "0",
+    "deretraction_speed": [
+        "30"
+    ],
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "M600",
+    "wipe": [
+        "0"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "z_hop": [
+        "0.3"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
+}

resources/profiles/Kingroon/process/0.08mm Standard @Kingroon KP3S PRO S1.json

@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.08mm Standard @Kingroon KP3S PRO S1",
+    "inherits": "fdm_process_common",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KP3S PRO S1 0.4 nozzle"
+    ],
+    "layer_height": "0.08",
+    "line_width": "0.4",
+    "print_settings_id": "0.08mm Standard @Kingroon KP3S PRO S1"
+}

resources/profiles/Kingroon/process/0.12mm Standard @Kingroon KLP1.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "name": "0.12mm Standard @Kingroon KLP1",
+    "inherits": "fdm_process_common",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KLP1 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.12",
+    "line_width": "0.4"
+}

resources/profiles/Kingroon/process/0.12mm Standard @Kingroon KP3S PRO S1.json

@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.12mm Standard @Kingroon KP3S PRO S1",
+    "inherits": "fdm_process_common",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KP3S PRO S1 0.4 nozzle"
+    ],
+    "layer_height": "0.12",
+    "line_width": "0.4",
+    "print_settings_id": "0.12mm Standard @Kingroon KP3S PRO S1"
+}

resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KLP1.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "name": "0.20mm Standard @Kingroon KLP1",
+    "inherits": "fdm_process_common",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KLP1 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "line_width": "0.42"
+}

resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S PRO S1.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "name": "0.20mm Standard @Kingroon KP3S PRO S1",
+    "inherits": "fdm_process_common",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KP3S PRO S1 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "line_width": "0.42"
+}

resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S PRO V2.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "name": "0.20mm Standard @Kingroon KP3S PRO V2",
+    "inherits": "fdm_process_common",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KP3S PRO V2 0.4 nozzle"
+    ],
+    "print_settings_id": "0.20mm Standard @Kingroon KP3S PRO V2",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "line_width": "0.42"
+}

resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json

@@ -0,0 +1,43 @@
+{
+    "type": "process",
+    "name": "0.20mm Standard @Kingroon KP3S V1",
+    "inherits": "fdm_process_common",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KP3S V1 0.4 nozzle"
+    ],
+    "bottom_shell_layers": "2",
+    "bridge_speed": "30",
+    "brim_type": "no_brim",
+    "default_acceleration": "10000",
+    "detect_thin_wall": "1",
+    "elefant_foot_compensation": "0.15",
+    "gap_infill_speed": "60",
+    "infill_wall_overlap": "8%",
+    "initial_layer_print_height": "0.25",
+    "initial_layer_travel_speed": "200",
+    "internal_solid_infill_acceleration": "6000",
+    "internal_solid_infill_speed": "160",
+    "outer_wall_acceleration": "4000",
+    "overhang_2_4_speed": "30",
+    "overhang_reverse": "1",
+    "overhang_reverse_internal_only": "1",
+    "overhang_reverse_threshold": "0%",
+    "overhang_speed_classic": "1",
+    "seam_gap": "0.1",
+    "seam_position": "back",
+    "slow_down_layers": "2",
+    "slowdown_for_curled_perimeters": "1",
+    "sparse_infill_acceleration": "6000",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "300",
+    "support_type": "normal(manual)",
+    "thick_bridges": "1",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "180",
+    "travel_acceleration": "10000",
+    "wall_generator": "classic",
+    "wall_loops": "2",
+    "wall_transition_angle": "25",
+    "xy_hole_compensation": "0.1"
+}

resources/profiles/Kingroon/process/0.30mm Standard @Kingroon KP3S 3.0.json

@@ -0,0 +1,86 @@
+{
+    "type": "process",
+    "name": "0.30mm Standard @Kingroon KP3S 3.0",
+    "inherits": "fdm_process_common",
+    "from": "User",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Kingroon KP3S 3.0 0.4 nozzle"
+    ],
+    "print_settings_id": "0.30mm Standard @Kingroon KP3S 3.0",
+    "bottom_surface_pattern": "monotonicline",
+    "bridge_acceleration": "500",
+    "bridge_speed": "30",
+    "brim_type": "no_brim",
+    "default_acceleration": "500",
+    "detect_narrow_internal_solid_infill": "0",
+    "dont_filter_internal_bridges": "limited",
+    "elefant_foot_compensation": "0.2",
+    "enable_prime_tower": "1",
+    "enable_support": "0",
+    "filter_out_gap_fill": "0.9",
+    "flush_into_support": "0",
+    "gap_fill_target": "topbottom",
+    "gap_infill_speed": "40",
+    "infill_combination": "1",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "50",
+    "initial_layer_print_height": "0.3",
+    "initial_layer_speed": "20",
+    "initial_layer_travel_speed": "250",
+    "inner_wall_acceleration": "700",
+    "inner_wall_line_width": "0.44",
+    "inner_wall_speed": "70",
+    "internal_bridge_speed": "50",
+    "internal_solid_infill_acceleration": "2000",
+    "internal_solid_infill_line_width": "0.5",
+    "internal_solid_infill_pattern": "monotonicline",
+    "internal_solid_infill_speed": "70",
+    "layer_height": "0.3",
+    "line_width": "0.44",
+    "max_travel_detour_distance": "70",
+    "max_volumetric_extrusion_rate_slope": "20",
+    "outer_wall_acceleration": "500",
+    "outer_wall_line_width": "0.44",
+    "outer_wall_speed": "50",
+    "overhang_1_4_speed": "70%",
+    "overhang_2_4_speed": "50%",
+    "overhang_3_4_speed": "30%",
+    "overhang_4_4_speed": "20%",
+    "prime_tower_brim_width": "1",
+    "prime_tower_width": "20",
+    "prime_volume": "30",
+    "raft_first_layer_density": "100%",
+    "reduce_crossing_wall": "1",
+    "reduce_infill_retraction": "0",
+    "scarf_joint_speed": "70",
+    "seam_gap": "0",
+    "seam_slope_entire_loop": "1",
+    "seam_slope_start_height": "0.1",
+    "skirt_loops": "1",
+    "sparse_infill_acceleration": "1500",
+    "sparse_infill_line_width": "0.5",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "70",
+    "support_base_pattern": "default",
+    "support_interface_pattern": "auto",
+    "support_interface_speed": "40",
+    "support_line_width": "0.44",
+    "support_speed": "70",
+    "support_threshold_angle": "30",
+    "support_type": "normal(auto)",
+    "top_surface_acceleration": "500",
+    "top_surface_line_width": "0.44",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_speed": "40",
+    "travel_acceleration": "4000",
+    "travel_speed": "250",
+    "tree_support_angle_slow": "35",
+    "tree_support_branch_angle_organic": "45",
+    "tree_support_branch_diameter_double_wall": "5",
+    "tree_support_tip_diameter": "1",
+    "tree_support_top_rate": "50%",
+    "wall_transition_angle": "59",
+    "wipe_before_external_loop": "1",
+    "wipe_tower_bridging": "2"
+}

resources/profiles/Kingroon/process/fdm_process_common.json

@@ -0,0 +1,186 @@
+{
+    "type": "process",
+    "name": "fdm_process_common",
+    "from": "system",
+    "instantiation": "false",
+    "accel_to_decel_enable": "0",
+    "accel_to_decel_factor": "50%",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "adaptive_layer_height": "0",
+    "bridge_flow": "0.9",
+    "brim_object_gap": "0.1",
+    "brim_type": "auto_brim",
+    "brim_width": "5",
+    "bridge_no_support": "0",
+    "bridge_speed": "50",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "compatible_printers_condition": "",
+    "default_acceleration": "3000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "1",
+    "enable_support": "1",
+    "compatible_printers": [],
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "1",
+    "exclude_object": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_infill_speed": "100",
+    "tree_support_with_infill": "0",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "40",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "25%",
+    "initial_layer_acceleration": "700",
+    "initial_layer_infill_speed": "105",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_speed": "50",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "300",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "100",
+    "interface_shells": "0",
+    "internal_bridge_support_thickness": "0",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "100",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "max_bridge_length": "30",
+    "max_travel_detour_distance": "0",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "minimum_sparse_infill_area": "15",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "3000",
+    "outer_wall_jerk": "9",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "80",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_width": "60",
+    "prime_volume": "45",
+    "print_sequence": "by layer",
+    "print_settings_id": "",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "reduce_crossing_wall": "0",
+    "seam_gap": "15%",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "2",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "100",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "2",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_speed": "150",
+    "support_style": "default",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "tree(auto)",
+    "thick_bridges": "0",
+    "timelapse_type": "0",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "3000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_speed": "60",
+    "travel_acceleration": "3000",
+    "travel_jerk": "12",
+    "travel_speed": "150",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "45",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_distance": "5",
+    "tree_support_brim_width": "3",
+    "tree_support_wall_count": "0",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "wall_loops": "3",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_on_loops": "1",
+    "wipe_speed": "80%",
+    "wipe_tower_no_sparse_layers": "0",
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0"
+}