Initial release

resources/profiles/Ginger Additive/process/1.80mm Vasemode.json

@@ -0,0 +1,76 @@
+{
+    "type": "process",
+    "name": "1.80mm Vasemode",
+    "inherits": "fdm_process_common",
+    "from": "User",
+    "instantiation": "true",
+    "accel_to_decel_enable": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "brim_type": "no_brim",
+    "brim_width": "20",
+    "default_acceleration": "2500",
+    "default_jerk": "5",
+    "elefant_foot_compensation": "0",
+    "ensure_vertical_shell_thickness": "none",
+    "exclude_object": "1",
+    "extra_perimeters_on_overhangs": "0",
+    "gap_fill_target": "nowhere",
+    "gap_infill_speed": "120",
+    "infill_anchor_max": "30",
+    "infill_jerk": "5",
+    "infill_wall_overlap": "30%",
+    "initial_layer_acceleration": "2500",
+    "initial_layer_jerk": "5",
+    "initial_layer_line_width": "4.2",
+    "initial_layer_print_height": "1",
+    "initial_layer_speed": "70",
+    "inner_wall_acceleration": "2500",
+    "inner_wall_jerk": "5",
+    "inner_wall_line_width": "4.2",
+    "inner_wall_speed": "120",
+    "internal_solid_infill_line_width": "4.2",
+    "internal_solid_infill_speed": "120",
+    "layer_height": "1.8",
+    "line_width": "4.2",
+    "outer_wall_acceleration": "2500",
+    "outer_wall_jerk": "5",
+    "outer_wall_line_width": "4.2",
+    "outer_wall_speed": "120",
+    "overhang_1_4_speed": "20",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "40",
+    "overhang_4_4_speed": "40",
+    "overhang_reverse_internal_only": "1",
+    "overhang_reverse_threshold": "0%",
+    "print_settings_id": "1.80mm Vasemode",
+    "role_based_wipe_speed": "1",
+    "seam_position": "aligned",
+    "skirt_distance": "10",
+    "sparse_infill_density": "0%",
+    "sparse_infill_line_width": "4.2",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "120",
+    "spiral_mode": "1",
+    "support_line_width": "4.2",
+    "support_speed": "120",
+    "thick_internal_bridges": "0",
+    "top_shell_layers": "0",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "2500",
+    "top_surface_jerk": "5",
+    "top_surface_line_width": "4.2",
+    "top_surface_speed": "120",
+    "travel_acceleration": "2500",
+    "travel_jerk": "7",
+    "travel_speed": "250",
+    "wall_loops": "1",
+    "wipe_on_loops": "1",
+    "wipe_speed": "40",
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+    "skin_infill_line_width": "3.0",
+    "skeleton_infill_line_width": "3.0",
+    "compatible_printers": [
+        "Ginger G1 3.0 nozzle"
+    ]
+}