Initial release

resources/profiles/Flashforge/process/0.16mm Standard @FF G4P HF.json

@@ -0,0 +1,49 @@
+{
+    "type": "process",
+    "name": "0.16mm Standard @FF G4P HF",
+    "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "bridge_speed": "15",
+    "brim_type": "auto_brim",
+    "elefant_foot_compensation": "0.1",
+    "enable_arc_fitting": "1",
+    "enable_support": "0",
+    "filter_out_gap_fill": "0.1",
+    "flush_into_support": "1",
+    "compatible_printers": [
+        "Flashforge Guider4 Pro 0.4 HF nozzle"
+    ],
+    "gap_fill_target": "topbottom",
+    "initial_layer_infill_speed": "80",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_speed": "300",
+    "layer_height": "0.16",
+    "only_one_wall_first_layer": "1",
+    "prime_tower_brim_width": "5",
+    "prime_tower_width": "30",
+    "prime_volume": "30",
+    "print_settings_id": "0.16mm Standard @FF G4P HF",
+    "seam_gap": "5%",
+    "skirt_loops": "0",
+    "small_perimeter_speed": "10",
+    "sparse_infill_pattern": "grid",
+    "sparse_infill_speed": "330",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.14",
+    "support_interface_filament": "0",
+    "support_interface_spacing": "0.2",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.42",
+    "support_speed": "150",
+    "support_top_z_distance": "0.14",
+    "support_type": "tree(auto)",
+    "travel_acceleration": "30000",
+    "travel_speed": "600",
+    "wipe_tower_cone_angle": "10",
+    "wipe_tower_extra_spacing": "110%"
+}