mirror of
https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git
synced 2026-05-14 13:02:39 -07:00
Initial release
This commit is contained in:
Louis Rossmann
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.06",
|
||||
"print_settings_id": "0.06mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"support_top_z_distance": "0.08"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.06",
|
||||
"print_settings_id": "0.06mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"support_top_z_distance": "0.08"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.08",
|
||||
"print_settings_id": "0.08mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.08",
|
||||
"print_settings_id": "0.08mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1"
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @FF AD5X 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP012",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.25 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"layer_height": "0.1",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.10mm Standard @FF AD5X 0.25 nozzle",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"wall_loops": "3"
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @FF G4 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_acceleration": "10%",
|
||||
"bridge_speed": "15",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.25 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "50",
|
||||
"layer_height": "0.1",
|
||||
"only_one_wall_top": "1",
|
||||
"print_settings_id": "0.10mm Standard @FF G4 0.25 nozzle",
|
||||
"resolution": "0.005",
|
||||
"seam_gap": "5%",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"wall_loops": "3"
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @FF G4P 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_acceleration": "10%",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.25 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "50",
|
||||
"layer_height": "0.1",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "15",
|
||||
"print_settings_id": "0.10mm Standard @FF G4P 0.25 nozzle",
|
||||
"seam_gap": "5%",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"wall_loops": "3",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.1",
|
||||
"print_settings_id": "0.10mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.1",
|
||||
"print_settings_id": "0.10mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_top_z_distance": "0.1"
|
||||
}
|
||||
@@ -0,0 +1,110 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Detail @Flashforge Guider 2s 0.4 nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GS001",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "80%",
|
||||
"brim_width": "5",
|
||||
"bridge_no_support": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"brim_object_gap": "0.1",
|
||||
"default_acceleration": "200",
|
||||
"detect_overhang_wall": "1",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_support": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"gap_infill_speed": "100",
|
||||
"infill_direction": "45",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.20",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"infill_combination": "1",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"initial_layer_acceleration": "200",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"line_width": "0.42",
|
||||
"layer_height": "0.12",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"max_travel_detour_distance": "0",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "40",
|
||||
"outer_wall_acceleration": "200",
|
||||
"inner_wall_acceleration": "200",
|
||||
"bridge_acceleration": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"travel_acceleration": "200",
|
||||
"skirt_speed": "10",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"slow_down_layers": "2",
|
||||
"only_one_wall_top": "1",
|
||||
"print_sequence": "by layer",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_speed": "100%",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.23",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "100%",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"skirt_loops": "2",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "100",
|
||||
"travel_speed": "70",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_acceleration": "200",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"wall_loops": "3",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_generator": "arachne",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 2s 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Flashforge AD5M 0.4 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.12",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"print_settings_id": "0.12mm Fine @Flashforge AD5M 0.4 Nozzle",
|
||||
"support_bottom_interface_spacing": "0.3",
|
||||
"support_bottom_z_distance": "0.15",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.3",
|
||||
"support_interface_speed": "40",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_speed": "100",
|
||||
"support_top_z_distance": "0.15",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.12",
|
||||
"bridge_flow": "0.95",
|
||||
"infill_wall_overlap": "30%",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"print_settings_id": "0.12mm Fine @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_bottom_interface_spacing": "0.3",
|
||||
"support_bottom_z_distance": "0.15",
|
||||
"support_interface_spacing": "0.3",
|
||||
"support_line_width": "0.4",
|
||||
"support_top_z_distance": "0.15",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Flashforge G3U 0.4 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 3 Ultra 0.4 Nozzle"
|
||||
],
|
||||
"bridge_flow": "0.96",
|
||||
"bridge_speed": "20",
|
||||
"infill_wall_overlap": "25%",
|
||||
"internal_bridge_speed": "40",
|
||||
"layer_height": "0.12",
|
||||
"print_settings_id": "0.12mm Fine @Flashforge G3U 0.4 Nozzle",
|
||||
"support_bottom_interface_spacing": "0.18",
|
||||
"support_bottom_z_distance": "0.15",
|
||||
"support_interface_spacing": "0.18",
|
||||
"support_line_width": "0.4",
|
||||
"support_speed": "80",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": "",
|
||||
"prime_tower_brim_width": "5"
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @FF AD5X 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP012",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.25 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.12mm Standard @FF AD5X 0.25 nozzle",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"wall_loops": "3"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @FF G4 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_acceleration": "10%",
|
||||
"bridge_speed": "15",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.25 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "50",
|
||||
"only_one_wall_top": "1",
|
||||
"print_settings_id": "0.12mm Standard @FF G4 0.25 nozzle",
|
||||
"resolution": "0.005",
|
||||
"seam_gap": "5%",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"wall_loops": "3"
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @FF G4P 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_acceleration": "10%",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.25 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "50",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "15",
|
||||
"print_settings_id": "0.12mm Standard @FF G4P 0.25 nozzle",
|
||||
"seam_gap": "5%",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"wall_loops": "3",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP012",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"print_settings_id": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"bottom_shell_layers": "4",
|
||||
"brim_width": "3",
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "150",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"initial_layer_line_width": "0.3",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"initial_layer_speed": "35",
|
||||
"inner_wall_line_width": "0.3",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_line_width": "0.3",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.12",
|
||||
"line_width": "0.25",
|
||||
"outer_wall_line_width": "0.25",
|
||||
"outer_wall_speed": "60",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_line_width": "0.3",
|
||||
"sparse_infill_speed": "100",
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"support_interface_spacing": "0.25",
|
||||
"support_line_width": "0.25",
|
||||
"support_object_xy_distance": "0.2",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.12",
|
||||
"top_shell_layers": "7",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_line_width": "0.3",
|
||||
"top_surface_speed": "150",
|
||||
"tree_support_tip_diameter": "1.2",
|
||||
"wipe_speed": "80%"
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP011",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"print_settings_id": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"bottom_shell_layers": "4",
|
||||
"brim_width": "3",
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "150",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"initial_layer_line_width": "0.3",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"initial_layer_speed": "35",
|
||||
"inner_wall_line_width": "0.3",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_line_width": "0.3",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.12",
|
||||
"line_width": "0.25",
|
||||
"outer_wall_line_width": "0.25",
|
||||
"outer_wall_speed": "60",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_line_width": "0.3",
|
||||
"sparse_infill_speed": "100",
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"support_interface_spacing": "0.25",
|
||||
"support_line_width": "0.25",
|
||||
"support_object_xy_distance": "0.2",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.12",
|
||||
"top_shell_layers": "7",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_line_width": "0.3",
|
||||
"top_surface_speed": "150",
|
||||
"tree_support_tip_diameter": "1.2",
|
||||
"wipe_speed": "80%"
|
||||
}
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.13mm Standard @Flashforge AD4 0.3 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.30",
|
||||
"from": "System",
|
||||
"setting_id": "GP006",
|
||||
"instantiation": "true",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_travel_speed": "30",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"default_acceleration": "10000",
|
||||
"outer_wall_acceleration": "3000",
|
||||
"outer_wall_speed": "25",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 4 Series 0.3 Nozzle"
|
||||
],
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"top_surface_speed": "60",
|
||||
"travel_speed": "100",
|
||||
"initial_layer_line_width": "0.3",
|
||||
"inner_wall_line_width": "0.3",
|
||||
"internal_solid_infill_line_width": "0.3",
|
||||
"layer_height": "0.13",
|
||||
"line_width": "0.3",
|
||||
"outer_wall_line_width": "0.3",
|
||||
"sparse_infill_line_width": "0.3",
|
||||
"support_line_width": "0.3",
|
||||
"top_surface_line_width": "0.3"
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @FF AD5X 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP012",
|
||||
"instantiation": "true",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.25 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"layer_height": "0.14",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.14mm Standard @FF AD5X 0.25 nozzle",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"wall_loops": "3"
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @FF G4 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_acceleration": "10%",
|
||||
"bridge_speed": "15",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.25 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "50",
|
||||
"layer_height": "0.14",
|
||||
"only_one_wall_top": "1",
|
||||
"print_settings_id": "0.14mm Standard @FF G4 0.25 nozzle",
|
||||
"resolution": "0.005",
|
||||
"seam_gap": "5%",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"wall_loops": "3"
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @FF G4P 0.25 nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_acceleration": "10%",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.25 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "50",
|
||||
"layer_height": "0.14",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "20",
|
||||
"print_settings_id": "0.14mm Standard @FF G4P 0.25 nozzle",
|
||||
"seam_gap": "5%",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"wall_loops": "3",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.14",
|
||||
"print_settings_id": "0.14mm Standard @Flashforge AD5M 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.14",
|
||||
"support_top_z_distance": "0.14"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.25 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.14",
|
||||
"print_settings_id": "0.14mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
|
||||
"support_bottom_z_distance": "0.14",
|
||||
"support_top_z_distance": "0.14"
|
||||
}
|
||||
@@ -0,0 +1,110 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GS002",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"internal_bridge_speed": "150%",
|
||||
"brim_width": "5",
|
||||
"bridge_no_support": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"brim_object_gap": "0.1",
|
||||
"default_acceleration": "200",
|
||||
"detect_overhang_wall": "1",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_support": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"gap_infill_speed": "30",
|
||||
"infill_direction": "45",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.27",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"infill_combination": "1",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"initial_layer_acceleration": "200",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"line_width": "0.42",
|
||||
"layer_height": "0.16",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"max_travel_detour_distance": "0",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "25",
|
||||
"outer_wall_acceleration": "200",
|
||||
"inner_wall_acceleration": "200",
|
||||
"bridge_acceleration": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"travel_acceleration": "200",
|
||||
"skirt_speed": "10",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"only_one_wall_top": "1",
|
||||
"print_sequence": "by layer",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_speed": "200",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.23",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "80",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"skirt_loops": "2",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "100",
|
||||
"travel_speed": "80",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_acceleration": "200",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"wall_loops": "2",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_generator": "arachne",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 2s 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @FF AD5X",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.4 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"layer_height": "0.16",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.16mm Standard @FF AD5X",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_speed": "330",
|
||||
"support_bottom_z_distance": "0.14",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_top_z_distance": "0.14",
|
||||
"support_type": "tree(auto)"
|
||||
}
|
||||
@@ -0,0 +1,43 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @FF G4 HF",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "50%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"layer_height": "0.16",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"print_settings_id": "0.16mm Standard @FF G4 HF",
|
||||
"resolution": "0.005",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "330",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.14",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.14",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600"
|
||||
}
|
||||
@@ -0,0 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @FF G4",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.4 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_speed": "60",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "300",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "30",
|
||||
"print_settings_id": "0.16mm Standard @FF G4",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_speed": "330",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)",
|
||||
"top_shell_layers": "6",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,49 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @FF G4P HF",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"layer_height": "0.16",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "30",
|
||||
"print_settings_id": "0.16mm Standard @FF G4P HF",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "330",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.14",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.14",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @FF G4P",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.98",
|
||||
"bridge_flow": "0.98",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.4 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_speed": "60",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "300",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "30",
|
||||
"print_settings_id": "0.16mm Standard @FF G4P",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_speed": "330",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)",
|
||||
"top_shell_layers": "6",
|
||||
"top_solid_infill_flow_ratio": "0.98",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @FF AD5X 0.6 nozzle",
|
||||
"inherits": "0.18mm Fine @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.6 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.18mm Fine @FF AD5X 0.6 nozzle",
|
||||
"skirt_loops": "0",
|
||||
"support_bottom_z_distance": "0.22",
|
||||
"support_top_z_distance": "0.22"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @Flashforge AD5M 0.6 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.18",
|
||||
"infill_wall_overlap": "40%",
|
||||
"initial_layer_line_width": "0.65",
|
||||
"print_settings_id": "0.18mm Fine @Flashforge AD5M 0.6 Nozzle",
|
||||
"seam_gap": "5%",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_speed": "100",
|
||||
"support_top_z_distance": "0.2",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.18",
|
||||
"infill_wall_overlap": "40%",
|
||||
"initial_layer_line_width": "0.65",
|
||||
"print_settings_id": "0.18mm Fine @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"seam_gap": "6%",
|
||||
"support_bottom_interface_spacing": "0.35",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.35",
|
||||
"support_interface_speed": "40",
|
||||
"support_object_xy_distance": "0.4",
|
||||
"support_speed": "100",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 3 Ultra 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": "",
|
||||
"layer_height": "0.18",
|
||||
"print_settings_id": "0.18mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"support_speed": "80"
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm High-Speed @Flashforge AD4 HS Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"initial_layer_line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"support_line_width": "0.4",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_acceleration": "100",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_travel_speed": "200",
|
||||
"outer_wall_speed": "80",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "80",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "80",
|
||||
"support_speed": "120",
|
||||
"top_surface_acceleration": "100",
|
||||
"travel_speed": "150",
|
||||
"default_acceleration": "7000",
|
||||
"outer_wall_acceleration": "1500",
|
||||
"inner_wall_acceleration": "1500",
|
||||
"travel_acceleration": "7000",
|
||||
"internal_solid_infill_acceleration": "1500",
|
||||
"sparse_infill_speed": "100",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "120",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "70",
|
||||
"overhang_4_4_speed": "50",
|
||||
"skirt_speed": "40",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "60",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 4 Series HS Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @FF AD5X",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.4 nozzle"
|
||||
],
|
||||
"initial_layer_print_height": "0.25",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.20mm Standard @FF AD5X",
|
||||
"skirt_loops": "0",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)"
|
||||
}
|
||||
@@ -0,0 +1,39 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @FF G4 HF",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "50%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "300",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"print_settings_id": "0.20mm Standard @FF G4 HF",
|
||||
"resolution": "0.005",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600"
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @FF G4 PLA600",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "250",
|
||||
"infill_wall_overlap": "50%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "600",
|
||||
"internal_solid_infill_speed": "600",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"print_settings_id": "0.20mm Standard @FF G4 PLA600",
|
||||
"resolution": "0.005",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "600",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "200",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)",
|
||||
"top_surface_speed": "300",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600"
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @FF G4",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.4 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"initial_layer_speed": "60",
|
||||
"max_travel_detour_distance": "300",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "40",
|
||||
"print_settings_id": "0.20mm Standard @FF G4",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @FF G4P HF for PLA 600",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "250",
|
||||
"infill_wall_overlap": "50%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "600",
|
||||
"internal_solid_infill_speed": "600",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"print_settings_id": "0.20mm Standard @FF G4P HF for PLA 600",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_speed": "600",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "200",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)",
|
||||
"top_surface_speed": "300",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,44 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @FF G4P HF",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "300",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"print_settings_id": "0.20mm Standard @FF G4P HF",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @FF G4P",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.98",
|
||||
"bridge_flow": "0.98",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.4 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"initial_layer_speed": "60",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"max_travel_detour_distance": "300",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "40",
|
||||
"print_settings_id": "0.20mm Standard @FF G4P",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"top_solid_infill_flow_ratio": "0.98",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge AD3 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"initial_layer_line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"support_line_width": "0.4",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_acceleration": "50",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"outer_wall_speed": "30",
|
||||
"inner_wall_speed": "42",
|
||||
"internal_solid_infill_speed": "30",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"support_speed": "100",
|
||||
"top_surface_acceleration": "50",
|
||||
"travel_speed": "80",
|
||||
"default_acceleration": "150",
|
||||
"outer_wall_acceleration": "100",
|
||||
"inner_wall_acceleration": "100",
|
||||
"travel_acceleration": "150",
|
||||
"internal_solid_infill_acceleration": "100",
|
||||
"sparse_infill_speed": "60",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"skirt_speed": "20",
|
||||
"wall_sequence": "inner-outer-inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "48",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 3 Series 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge AD4 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"initial_layer_line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"support_line_width": "0.4",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_acceleration": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"outer_wall_speed": "50",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"top_surface_speed": "35",
|
||||
"gap_infill_speed": "50",
|
||||
"support_speed": "100",
|
||||
"top_surface_acceleration": "50",
|
||||
"travel_speed": "80",
|
||||
"default_acceleration": "5000",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"inner_wall_acceleration": "1000",
|
||||
"travel_acceleration": "5000",
|
||||
"internal_solid_infill_acceleration": "1000",
|
||||
"sparse_infill_speed": "60",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "80",
|
||||
"overhang_3_4_speed": "50",
|
||||
"overhang_4_4_speed": "30",
|
||||
"skirt_speed": "20",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "50",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 4 Series 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"only_one_wall_top": "0",
|
||||
"infill_wall_overlap": "50%",
|
||||
"print_settings_id": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"only_one_wall_top": "0",
|
||||
"infill_wall_overlap": "50%",
|
||||
"print_settings_id": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge Artemis 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.18",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"initial_layer_line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"support_line_width": "0.4",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_acceleration": "50",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"initial_layer_travel_speed": "40",
|
||||
"outer_wall_speed": "30",
|
||||
"inner_wall_speed": "42",
|
||||
"internal_solid_infill_speed": "30",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"support_speed": "100",
|
||||
"top_surface_acceleration": "50",
|
||||
"travel_speed": "100",
|
||||
"default_acceleration": "150",
|
||||
"outer_wall_acceleration": "100",
|
||||
"inner_wall_acceleration": "100",
|
||||
"travel_acceleration": "150",
|
||||
"internal_solid_infill_acceleration": "100",
|
||||
"sparse_infill_speed": "60",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"skirt_speed": "20",
|
||||
"wall_sequence": "inner-outer-inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "80%",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Artemis 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -0,0 +1,244 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"accel_to_decel_enable": "0",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "50%",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "1",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "25",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.1",
|
||||
"brim_type": "no_brim",
|
||||
"brim_width": "5",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 3 Ultra 0.4 Nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "0",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "1",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "1",
|
||||
"exclude_object": "0",
|
||||
"extra_perimeters_on_overhangs": "0",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "0",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_infill_speed": "200",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "0",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400%",
|
||||
"infill_anchor_max": "20",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "40",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "250",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "50",
|
||||
"internal_solid_infill_acceleration": "7000",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "monotonic",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"ironing_angle": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "3",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "40",
|
||||
"overhang_3_4_speed": "20",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "12",
|
||||
"prime_volume": "40",
|
||||
"print_flow_ratio": "1",
|
||||
"print_sequence": "by layer",
|
||||
"print_settings_id": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"single_extruder_multi_material_priming": "1",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_speed": "270",
|
||||
"spiral_mode": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_bottom_interface_spacing": "0.1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "1",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.1",
|
||||
"support_interface_speed": "30",
|
||||
"support_interface_top_layers": "4",
|
||||
"support_line_width": "0.45",
|
||||
"support_object_xy_distance": "0.3",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "80",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "30",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_type": "normal(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "1",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "200",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "12",
|
||||
"travel_speed": "500",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "200",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "0",
|
||||
"wipe_tower_extra_spacing": "100%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
@@ -0,0 +1,111 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge Guider 2s 0.4 nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GS003",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "50%",
|
||||
"internal_bridge_speed": "70%",
|
||||
"brim_width": "5",
|
||||
"bridge_no_support": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"brim_object_gap": "0.1",
|
||||
"default_acceleration": "200",
|
||||
"detect_overhang_wall": "1",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_support": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"gap_infill_speed": "100",
|
||||
"infill_direction": "45",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.27",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"infill_combination": "1",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"initial_layer_acceleration": "200",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"line_width": "0.42",
|
||||
"layer_height": "0.2",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"max_travel_detour_distance": "0",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "40",
|
||||
"outer_wall_acceleration": "200",
|
||||
"inner_wall_acceleration": "200",
|
||||
"bridge_acceleration": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"travel_acceleration": "200",
|
||||
"skirt_speed": "10",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"slow_down_layers": "2",
|
||||
"only_one_wall_top": "1",
|
||||
"print_sequence": "by layer",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_speed": "100%",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.23",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "100%",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"skirt_loops": "2",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "100",
|
||||
"travel_speed": "80",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_acceleration": "200",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"wall_loops": "2",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_generator": "arachne",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 2s 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @FF AD5X",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "180",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.4 nozzle"
|
||||
],
|
||||
"initial_layer_print_height": "0.25",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"layer_height": "0.24",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.24mm Draft @FF AD5X",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_speed": "230",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Flashforge AD5M 0.4 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"infill_wall_overlap": "25%",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"print_settings_id": "0.24mm Draft @Flashforge AD5M 0.4 Nozzle",
|
||||
"support_bottom_interface_spacing": "0.3",
|
||||
"support_bottom_z_distance": "0.15",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.3",
|
||||
"support_interface_speed": "40",
|
||||
"support_speed": "100",
|
||||
"support_top_z_distance": "0.15",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"infill_wall_overlap": "30%",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"inner_wall_line_width": "0.42",
|
||||
"outer_wall_acceleration": "3000",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"print_settings_id": "0.24mm Draft @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"sparse_infill_line_width": "0.42",
|
||||
"support_bottom_interface_spacing": "0.3",
|
||||
"support_interface_spacing": "0.3",
|
||||
"support_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Flashforge G3U 0.4 Nozzle",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"bridge_flow": "0.96",
|
||||
"bridge_speed": "15",
|
||||
"infill_wall_overlap": "25%",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 3 Ultra 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": "",
|
||||
"internal_bridge_speed": "30",
|
||||
"layer_height": "0.24",
|
||||
"print_settings_id": "0.24mm Draft @Flashforge G3U 0.4 Nozzle",
|
||||
"support_bottom_interface_spacing": "0.2",
|
||||
"support_bottom_z_distance": "0.15",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_line_width": "0.4",
|
||||
"support_object_xy_distance": "0.4",
|
||||
"support_speed": "80",
|
||||
"prime_tower_brim_width": "5"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @FF AD5X 0.8 nozzle",
|
||||
"inherits": "0.24mm Fine @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"internal_bridge_speed": "35",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "100",
|
||||
"print_settings_id": "0.24mm Fine @FF AD5X 0.8 nozzle",
|
||||
"solid_infill_direction": "0",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_layers": "4"
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @Flashforge AD5M 0.8 Nozzle",
|
||||
"inherits": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"bottom_shell_layers": "2",
|
||||
"bridge_flow": "0.96",
|
||||
"gap_infill_speed": "100",
|
||||
"infill_wall_overlap": "40%",
|
||||
"initial_layer_acceleration": "400",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"initial_layer_line_width": "0.85",
|
||||
"initial_layer_print_height": "0.45",
|
||||
"initial_layer_speed": "35",
|
||||
"inner_wall_line_width": "0.85",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"outer_wall_speed": "100",
|
||||
"print_settings_id": "0.24mm Fine @Flashforge AD5M 0.8 Nozzle",
|
||||
"seam_gap": "5%",
|
||||
"sparse_infill_acceleration": "50%",
|
||||
"sparse_infill_line_width": "0.85",
|
||||
"support_bottom_interface_spacing": "0.45",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.45",
|
||||
"support_interface_speed": "30",
|
||||
"support_line_width": "0.8",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.25",
|
||||
"top_shell_layers": "3",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_speed": "100"
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"inherits": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"bottom_shell_layers": "2",
|
||||
"bridge_flow": "0.96",
|
||||
"gap_infill_speed": "100",
|
||||
"infill_wall_overlap": "40%",
|
||||
"initial_layer_acceleration": "400",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"initial_layer_line_width": "0.85",
|
||||
"initial_layer_print_height": "0.45",
|
||||
"initial_layer_speed": "35",
|
||||
"inner_wall_line_width": "0.85",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"outer_wall_speed": "100",
|
||||
"print_settings_id": "0.24mm Fine @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"seam_gap": "5%",
|
||||
"sparse_infill_acceleration": "50%",
|
||||
"sparse_infill_line_width": "0.85",
|
||||
"support_bottom_interface_spacing": "0.45",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.45",
|
||||
"support_interface_speed": "30",
|
||||
"support_line_width": "0.8",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.25",
|
||||
"top_shell_layers": "3",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_speed": "100"
|
||||
}
|
||||
@@ -0,0 +1,43 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @FF G4 HF",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "180",
|
||||
"infill_wall_overlap": "50%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"layer_height": "0.24",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"print_settings_id": "0.24mm Standard @FF G4 HF",
|
||||
"resolution": "0.005",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "230",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.18",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.18",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600"
|
||||
}
|
||||
@@ -0,0 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @FF G4",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.4 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "180",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"initial_layer_speed": "60",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"layer_height": "0.24",
|
||||
"max_travel_detour_distance": "300",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "40",
|
||||
"print_settings_id": "0.24mm Standard @FF G4",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_speed": "230",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"top_shell_layers": "4",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,49 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @FF G4P HF",
|
||||
"inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_support": "0",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.4 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "180",
|
||||
"infill_wall_overlap": "50%",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"initial_layer_speed": "60",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"layer_height": "0.24",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"print_settings_id": "0.24mm Standard @FF G4P HF",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "230",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.18",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.18",
|
||||
"support_type": "tree(auto)",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @FF G4P",
|
||||
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.98",
|
||||
"bridge_flow": "0.98",
|
||||
"bridge_speed": "15",
|
||||
"brim_type": "auto_brim",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.4 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "180",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"initial_layer_speed": "60",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"layer_height": "0.24",
|
||||
"max_travel_detour_distance": "300",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "40",
|
||||
"print_settings_id": "0.24mm Standard @FF G4P",
|
||||
"seam_gap": "5%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "10",
|
||||
"sparse_infill_speed": "230",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.98",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "600",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,76 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm Standard @FF G4 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "20000",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.25",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "50",
|
||||
"print_settings_id": "0.25mm Standard @FF G4 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "300",
|
||||
"support_bottom_z_distance": "0.22",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"support_top_z_distance": "0.25",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,69 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm Standard @FF G4 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "20000",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.25",
|
||||
"line_width": "0.62",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "50",
|
||||
"print_settings_id": "0.25mm Standard @FF G4 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"support_top_z_distance": "0.3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,76 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "20000",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.25",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "50",
|
||||
"print_settings_id": "0.25mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "300",
|
||||
"support_bottom_z_distance": "0.22",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"support_top_z_distance": "0.25",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,67 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm Standard @FF G4P 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "20000",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 nozzle"
|
||||
],
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.25",
|
||||
"line_width": "0.62",
|
||||
"only_one_wall_first_layer": "1",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"overhang_speed_classic": "1",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_settings_id": "0.25mm Standard @FF G4P 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"support_top_z_distance": "0.3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_max_purge_speed": "120"
|
||||
}
|
||||
@@ -0,0 +1,111 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Draft @Flashforge Guider 2s 0.4 nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GS004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "50%",
|
||||
"internal_bridge_speed": "70%",
|
||||
"brim_width": "5",
|
||||
"bridge_no_support": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"brim_object_gap": "0.1",
|
||||
"default_acceleration": "200",
|
||||
"detect_overhang_wall": "1",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_support": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"gap_infill_speed": "100",
|
||||
"infill_direction": "45",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.30",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"infill_combination": "1",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"initial_layer_acceleration": "200",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"line_width": "0.42",
|
||||
"layer_height": "0.30",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"max_travel_detour_distance": "0",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "40",
|
||||
"outer_wall_acceleration": "200",
|
||||
"inner_wall_acceleration": "200",
|
||||
"bridge_acceleration": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"travel_acceleration": "200",
|
||||
"skirt_speed": "10",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"slow_down_layers": "2",
|
||||
"only_one_wall_top": "1",
|
||||
"print_sequence": "by layer",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"sparse_infill_density": "10%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_speed": "100%",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.23",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "100%",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"skirt_loops": "2",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "100",
|
||||
"travel_speed": "100",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_acceleration": "200",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"wall_loops": "2",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_generator": "arachne",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 2s 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Fast @Flashforge AD3 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"initial_layer_line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"support_line_width": "0.4",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_acceleration": "50",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "56",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"top_surface_speed": "40",
|
||||
"gap_infill_speed": "40",
|
||||
"support_speed": "100",
|
||||
"top_surface_acceleration": "50",
|
||||
"travel_speed": "100",
|
||||
"default_acceleration": "150",
|
||||
"outer_wall_acceleration": "100",
|
||||
"inner_wall_acceleration": "100",
|
||||
"travel_acceleration": "150",
|
||||
"internal_solid_infill_acceleration": "100",
|
||||
"sparse_infill_speed": "80",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"skirt_speed": "20",
|
||||
"wall_sequence": "inner-outer-inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "64",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 3 Series 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Fast @Flashforge AD4 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"initial_layer_line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"support_line_width": "0.4",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_acceleration": "60",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_travel_speed": "150",
|
||||
"outer_wall_speed": "50",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"top_surface_speed": "35",
|
||||
"gap_infill_speed": "50",
|
||||
"support_speed": "100",
|
||||
"top_surface_acceleration": "50",
|
||||
"travel_speed": "80",
|
||||
"default_acceleration": "5000",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"inner_wall_acceleration": "1000",
|
||||
"travel_acceleration": "5000",
|
||||
"internal_solid_infill_acceleration": "1000",
|
||||
"sparse_infill_speed": "60",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "80",
|
||||
"overhang_3_4_speed": "50",
|
||||
"overhang_4_4_speed": "30",
|
||||
"skirt_speed": "20",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "50",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 4 Series 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @FF AD5X 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.6 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.30mm Standard @FF AD5X 0.6 nozzle",
|
||||
"skirt_loops": "0",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_top_z_distance": "0.3"
|
||||
}
|
||||
@@ -0,0 +1,65 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @FF G4 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "50",
|
||||
"print_settings_id": "0.30mm Standard @FF G4 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @FF G4P 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 nozzle"
|
||||
],
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"overhang_speed_classic": "1",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_settings_id": "0.30mm Standard @FF G4P 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_max_purge_speed": "120"
|
||||
}
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Flashforge AD3 0.6 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.6",
|
||||
"initial_layer_line_width": "0.6",
|
||||
"outer_wall_line_width": "0.6",
|
||||
"inner_wall_line_width": "0.6",
|
||||
"top_surface_line_width": "0.6",
|
||||
"sparse_infill_line_width": "0.6",
|
||||
"internal_solid_infill_line_width": "0.6",
|
||||
"support_line_width": "0.6",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_acceleration": "50",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"outer_wall_speed": "25",
|
||||
"inner_wall_speed": "35",
|
||||
"internal_solid_infill_speed": "30",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"support_speed": "100",
|
||||
"top_surface_acceleration": "50",
|
||||
"travel_speed": "100",
|
||||
"default_acceleration": "150",
|
||||
"outer_wall_acceleration": "100",
|
||||
"inner_wall_acceleration": "100",
|
||||
"travel_acceleration": "150",
|
||||
"internal_solid_infill_acceleration": "100",
|
||||
"sparse_infill_speed": "50",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"skirt_speed": "20",
|
||||
"wall_sequence": "inner-outer-inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "50",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 3 Series 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -0,0 +1,34 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Flashforge AD4 0.6 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.30",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 4 Series 0.6 Nozzle"
|
||||
],
|
||||
"only_one_wall_top": "0",
|
||||
"infill_wall_overlap": "50%",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_travel_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"outer_wall_acceleration": "3000",
|
||||
"outer_wall_speed": "25",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"small_perimeter_threshold": "8",
|
||||
"sparse_infill_speed": "60",
|
||||
"support_interface_speed": "50",
|
||||
"support_speed": "40",
|
||||
"support_type": "tree(auto)",
|
||||
"top_surface_acceleration": "500",
|
||||
"travel_acceleration": "8000",
|
||||
"travel_speed": "100"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.30",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"only_one_wall_top": "0",
|
||||
"infill_wall_overlap": "50%",
|
||||
"print_settings_id": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.30",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"only_one_wall_top": "0",
|
||||
"infill_wall_overlap": "50%",
|
||||
"print_settings_id": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,58 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.30",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 3 Ultra 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": "",
|
||||
"bottom_solid_infill_flow_ratio": "1.02",
|
||||
"bridge_flow": "0.96",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "0",
|
||||
"flush_into_support": "0",
|
||||
"gap_infill_speed": "120",
|
||||
"infill_wall_overlap": "40%",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_line_width": "0.6",
|
||||
"initial_layer_print_height": "0.35",
|
||||
"initial_layer_speed": "30",
|
||||
"inner_wall_line_width": "0.6",
|
||||
"inner_wall_speed": "160",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.6",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"line_width": "0.6",
|
||||
"outer_wall_acceleration": "3000",
|
||||
"outer_wall_line_width": "0.58",
|
||||
"outer_wall_speed": "120",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "5",
|
||||
"print_settings_id": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"seam_gap": "6%",
|
||||
"sparse_infill_acceleration": "70%",
|
||||
"sparse_infill_line_width": "0.6",
|
||||
"sparse_infill_speed": "200",
|
||||
"support_bottom_interface_spacing": "0.3",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_filament": "1",
|
||||
"support_interface_spacing": "0.3",
|
||||
"support_interface_speed": "40",
|
||||
"support_interface_top_layers": "4",
|
||||
"support_line_width": "0.58",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.32",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0",
|
||||
"top_surface_line_width": "0.6",
|
||||
"top_surface_speed": "120",
|
||||
"wipe_tower_bridging": "5"
|
||||
}
|
||||
@@ -0,0 +1,68 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Standard @FF G4 0.8 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "20000",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.8 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.32",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "70",
|
||||
"print_settings_id": "0.32mm Standard @FF G4 0.8 HF nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.82",
|
||||
"support_speed": "70",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,68 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Standard @FF G4P 0.8 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "20000",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.8 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.32",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "70",
|
||||
"print_settings_id": "0.32mm Standard @FF G4P 0.8 HF nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.82",
|
||||
"support_speed": "70",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @FF G4 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.36",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "70",
|
||||
"print_settings_id": "0.36mm Standard @FF G4 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,66 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @FF G4 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.36",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "70",
|
||||
"print_settings_id": "0.36mm Standard @FF G4 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.36",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "70",
|
||||
"print_settings_id": "0.36mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,63 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @FF G4P 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 nozzle"
|
||||
],
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.36",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"overhang_speed_classic": "1",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_settings_id": "0.36mm Standard @FF G4P 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_max_purge_speed": "120"
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.3mm Standard @FF G4 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "50",
|
||||
"print_settings_id": "0.3mm Standard @FF G4 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"support_top_z_distance": "0.3",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.3mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "50",
|
||||
"print_settings_id": "0.3mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"support_top_z_distance": "0.3",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @FF AD5X 0.8 nozzle",
|
||||
"inherits": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"internal_bridge_speed": "35",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "100",
|
||||
"print_settings_id": "0.40mm Standard @FF AD5X 0.8 nozzle",
|
||||
"solid_infill_direction": "0",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_top_z_distance": "0.3",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0"
|
||||
}
|
||||
@@ -0,0 +1,66 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @FF G4 0.8 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.8 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.4",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "80",
|
||||
"print_settings_id": "0.40mm Standard @FF G4 0.8 HF nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.82",
|
||||
"support_speed": "70",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,66 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @FF G4P 0.8 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.8 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.4",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "80",
|
||||
"print_settings_id": "0.40mm Standard @FF G4P 0.8 HF nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.82",
|
||||
"support_speed": "70",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"print_settings_id": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"initial_layer_line_width": "0.85",
|
||||
"initial_layer_speed": "35",
|
||||
"inner_wall_line_width": "0.85",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"layer_height": "0.4",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_line_width": "0.85",
|
||||
"support_bottom_interface_spacing": "0.4",
|
||||
"support_bottom_z_distance": "0.22",
|
||||
"support_interface_spacing": "0.4",
|
||||
"support_line_width": "0.82",
|
||||
"support_object_xy_distance": "0.4",
|
||||
"support_top_z_distance": "0.22",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_line_width": "0.82",
|
||||
"tree_support_tip_diameter": "1.2",
|
||||
"wipe_speed": "60%"
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"print_settings_id": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"initial_layer_line_width": "0.85",
|
||||
"initial_layer_speed": "35",
|
||||
"inner_wall_line_width": "0.85",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"layer_height": "0.4",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"skirt_loops": "0",
|
||||
"sparse_infill_line_width": "0.85",
|
||||
"support_bottom_interface_spacing": "0.4",
|
||||
"support_bottom_z_distance": "0.22",
|
||||
"support_interface_spacing": "0.4",
|
||||
"support_line_width": "0.82",
|
||||
"support_object_xy_distance": "0.4",
|
||||
"support_top_z_distance": "0.22",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_line_width": "0.82",
|
||||
"tree_support_tip_diameter": "1.2",
|
||||
"wipe_speed": "60%"
|
||||
}
|
||||
@@ -0,0 +1,60 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Flashforge G3U 0.8 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_0.40",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.4",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 3 Ultra 0.8 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": "",
|
||||
"bridge_flow": "0.96",
|
||||
"enable_arc_fitting": "0",
|
||||
"flush_into_support": "0",
|
||||
"gap_infill_speed": "100",
|
||||
"infill_wall_overlap": "55%",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_line_width": "0.85",
|
||||
"initial_layer_print_height": "0.5",
|
||||
"initial_layer_speed": "20",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"inner_wall_line_width": "0.8",
|
||||
"inner_wall_speed": "80",
|
||||
"internal_solid_infill_acceleration": "4000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": "160",
|
||||
"line_width": "0.8",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_line_width": "0.78",
|
||||
"outer_wall_speed": "80",
|
||||
"overhang_2_4_speed": "30",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "5",
|
||||
"print_settings_id": "0.40mm Standard @Flashforge G3U 0.8 Nozzle",
|
||||
"seam_gap": "5%",
|
||||
"sparse_infill_acceleration": "50%",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": "160",
|
||||
"support_base_pattern_spacing": "3",
|
||||
"support_bottom_interface_spacing": "0.35",
|
||||
"support_bottom_z_distance": "0.28",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_filament": "1",
|
||||
"support_interface_spacing": "0.35",
|
||||
"support_interface_speed": "30",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.75",
|
||||
"support_object_xy_distance": "0.6",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_line_width": "0.78",
|
||||
"top_surface_speed": "100",
|
||||
"wipe_tower_bridging": "5"
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Draft @FF AD5X 0.6 nozzle",
|
||||
"inherits": "0.42mm Draft @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.6 nozzle"
|
||||
],
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"print_settings_id": "0.42mm Draft @FF AD5X 0.6 nozzle",
|
||||
"skirt_loops": "0",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_top_z_distance": "0.3"
|
||||
}
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Draft @Flashforge AD5M 0.6 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.42",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"infill_wall_overlap": "40%",
|
||||
"initial_layer_line_width": "0.7",
|
||||
"initial_layer_print_height": "0.45",
|
||||
"outer_wall_acceleration": "3000",
|
||||
"print_settings_id": "0.42mm Draft @Flashforge AD5M 0.6 Nozzle",
|
||||
"seam_gap": "6%",
|
||||
"support_bottom_interface_spacing": "0.4",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.4",
|
||||
"support_line_width": "0.6",
|
||||
"support_object_xy_distance": "0.4",
|
||||
"support_speed": "100",
|
||||
"support_top_z_distance": "0.22",
|
||||
"top_surface_line_width": "0.6",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Draft @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.42",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"post_process": "",
|
||||
"bridge_flow": "0.96",
|
||||
"infill_wall_overlap": "40%",
|
||||
"initial_layer_line_width": "0.7",
|
||||
"initial_layer_print_height": "0.45",
|
||||
"outer_wall_line_width": "0.6",
|
||||
"print_settings_id": "0.42mm Draft @Flashforge AD5M Pro 0.6 Nozzle",
|
||||
"seam_gap": "6%",
|
||||
"support_bottom_interface_spacing": "0.35",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "0",
|
||||
"support_interface_spacing": "0.35",
|
||||
"support_interface_speed": "40",
|
||||
"support_line_width": "0.6",
|
||||
"support_object_xy_distance": "0.4",
|
||||
"support_speed": "100",
|
||||
"support_top_z_distance": "0.22",
|
||||
"top_surface_line_width": "0.6",
|
||||
"skirt_loops": "0"
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @FF G4 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.42",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "80",
|
||||
"print_settings_id": "0.42mm Standard @FF G4 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,66 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @FF G4 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.6 nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.42",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "80",
|
||||
"print_settings_id": "0.42mm Standard @FF G4 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"bridge_flow": "0.98",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "70",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.98",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"layer_height": "0.42",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "80",
|
||||
"print_settings_id": "0.42mm Standard @FF G4P 0.6 HF nozzle",
|
||||
"reduce_infill_retraction": "0",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"small_perimeter_threshold": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "105",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"travel_acceleration": "30000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "500",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,63 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @FF G4P 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 nozzle"
|
||||
],
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.42",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"overhang_speed_classic": "1",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_settings_id": "0.42mm Standard @FF G4P 0.6 nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "10%",
|
||||
"skirt_loops": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.62",
|
||||
"support_speed": "70",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_max_purge_speed": "120"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider 3 Ultra 0.6 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": "",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"layer_height": "0.42",
|
||||
"print_settings_id": "0.42mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"support_speed": "80",
|
||||
"support_top_z_distance": "0.3"
|
||||
}
|
||||
@@ -0,0 +1,66 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Standard @FF G4 0.8 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 0.8 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.48",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "90",
|
||||
"print_settings_id": "0.48mm Standard @FF G4 0.8 HF nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "8%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.82",
|
||||
"support_speed": "70",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,66 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Standard @FF G4P 0.8 HF nozzle",
|
||||
"inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"bottom_solid_infill_flow_ratio": "0.96",
|
||||
"bridge_acceleration": "3000",
|
||||
"brim_type": "auto_brim",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"flush_into_support": "1",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.8 HF nozzle"
|
||||
],
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "800",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_bridge_flow": "0.96",
|
||||
"internal_bridge_speed": "35",
|
||||
"internal_solid_infill_acceleration": "8000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"layer_height": "0.48",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "12",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_volume": "90",
|
||||
"print_settings_id": "0.48mm Standard @FF G4P 0.8 HF nozzle",
|
||||
"role_based_wipe_speed": "0",
|
||||
"seam_gap": "8%",
|
||||
"skirt_loops": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "35",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_interface_filament": "0",
|
||||
"support_line_width": "0.82",
|
||||
"support_speed": "70",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_solid_infill_flow_ratio": "0.96",
|
||||
"top_surface_acceleration": "3000",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_speed": "100",
|
||||
"travel_acceleration": "20000",
|
||||
"travel_speed": "550",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_spacing": "110%"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56mm Draft @FF AD5X 0.8 nozzle",
|
||||
"inherits": "0.56mm Draft @Flashforge AD5M Pro 0.8 Nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
],
|
||||
"enable_prime_tower": "1",
|
||||
"exclude_object": "1",
|
||||
"filter_out_gap_fill": "0.1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"infill_wall_overlap": "20%",
|
||||
"internal_bridge_speed": "35",
|
||||
"only_one_wall_top": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "100",
|
||||
"print_settings_id": "0.56mm Draft @FF AD5X 0.8 nozzle",
|
||||
"solid_infill_direction": "0",
|
||||
"support_bottom_z_distance": "0.3",
|
||||
"support_top_z_distance": "0.3",
|
||||
"thick_internal_bridges": "0",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0"
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user