PublicCodeMirror/OrcaSlicer-bambulab
1
0
Fork 0
mirror of https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git synced 2026-05-14 13:02:39 -07:00
Code Issues Packages Projects Releases Wiki Activity

Make tests pass

Browse Source
This commit is contained in:
Alessandro Ranellucci
2014-01-05 00:36:33 +01:00
parent a2cbb261cb
commit 07b9b12475
16 changed files with 159 additions and 82 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
t/retraction.t
View File

@@ -41,8 +41,8 @@ my $test = sub {
if ($info->{dist_Z}) {
# lift move or lift + change layer
if (_eq($info->{dist_Z}, $print->extruders->[$tool]->retract_lift)
|| (_eq($info->{dist_Z}, $conf->layer_height + $print->extruders->[$tool]->retract_lift) && $print->extruders->[$tool]->retract_lift > 0)) {
if (_eq($info->{dist_Z}, $print->config->get_at('retract_lift', $tool))
|| (_eq($info->{dist_Z}, $conf->layer_height + $print->config->get_at('retract_lift', $tool)) && $print->config->get_at('retract_lift', $tool) > 0)) {
fail 'only lifting while retracted' if !$retracted[$tool] && !($conf->g0 && $info->{retracting});
fail 'double lift' if $lifted;
$lifted = 1;
@@ -50,8 +50,8 @@ my $test = sub {
if ($info->{dist_Z} < 0) {
fail 'going down only after lifting' if !$lifted;
fail 'going down by the same amount of the lift or by the amount needed to get to next layer'
if !_eq($info->{dist_Z}, -$print->extruders->[$tool]->retract_lift)
&& !_eq($info->{dist_Z}, -$print->extruders->[$tool]->retract_lift + $conf->layer_height);
if !_eq($info->{dist_Z}, -$print->config->get_at('retract_lift', $tool))
&& !_eq($info->{dist_Z}, -$print->config->get_at('retract_lift', $tool) + $conf->layer_height);
$lifted = 0;
}
fail 'move Z at travel speed' if ($args->{F} // $self->F) != $conf->travel_speed * 60;
@@ -59,9 +59,9 @@ my $test = sub {
if ($info->{retracting}) {
$retracted[$tool] = 1;
$retracted_length[$tool] += -$info->{dist_E};
if (_eq($retracted_length[$tool], $print->extruders->[$tool]->retract_length)) {
if (_eq($retracted_length[$tool], $print->config->get_at('retract_length', $tool))) {
# okay
} elsif (_eq($retracted_length[$tool], $print->extruders->[$tool]->retract_length_toolchange)) {
} elsif (_eq($retracted_length[$tool], $print->config->get_at('retract_length_toolchange', $tool))) {
$wait_for_toolchange = 1;
} else {
fail 'retracted by the correct amount';
@@ -72,9 +72,9 @@ my $test = sub {
if ($info->{extruding}) {
fail 'only extruding while not lifted' if $lifted;
if ($retracted[$tool]) {
my $expected_amount = $retracted_length[$tool] + $print->extruders->[$tool]->retract_restart_extra;
my $expected_amount = $retracted_length[$tool] + $print->config->get_at('retract_restart_extra', $tool);
if ($changed_tool && $toolchange_count[$tool] > 1) {
$expected_amount = $print->extruders->[$tool]->retract_length_toolchange + $print->extruders->[$tool]->retract_restart_extra_toolchange;
$expected_amount = $print->config->get_at('retract_length_toolchange', $tool) + $print->config->get_at('retract_restart_extra_toolchange', $tool);
$changed_tool = 0;
}
fail 'unretracted by the correct amount'
@@ -83,7 +83,7 @@ my $test = sub {
$retracted_length[$tool] = 0;
}
}
if ($info->{travel} && $info->{dist_XY} >= $print->extruders->[$tool]->retract_before_travel) {
if ($info->{travel} && $info->{dist_XY} >= $print->config->get_at('retract_before_travel', $tool)) {
fail 'retracted before long travel move' if !$retracted[$tool];
}
});