PublicCodeMirror/OrcaSlicer-bambulab
1
0
Fork 0
mirror of https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git synced 2026-05-14 13:02:39 -07:00
Code Issues Packages Projects Releases Wiki Activity

New fill types (hilbertcurve, archimedeanchords, octagramspiral) and ability to use different patterns for solid layers. #20

Browse Source
This commit is contained in:
Alessandro Ranellucci
2011-11-13 18:14:02 +01:00
parent 041e9877a3
commit 038caddcda
22 changed files with 391 additions and 93 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
README.markdown
View File

@@ -94,9 +94,11 @@ The author is Alessandro Ranellucci (me).
Use relative distances for extrusion in GCODE output
--z-offset Additional height in mm to add to vertical coordinates
(+/-, default: 0)
--gcode-arcs Use G2/G3 commands for native arcs (experimental, not supported
by all firmwares)
Filament options:
--filament-diameter Diameter of your raw filament (default: 3)
--filament-diameter Diameter in mm of your raw filament (default: 3)
--filament-packing-density
Ratio of the extruded volume over volume pushed
into the extruder (default: 1)
@@ -123,7 +125,9 @@ The author is Alessandro Ranellucci (me).
(range: 1+, default: 3)
--fill-density Infill density (range: 0-1, default: 0.4)
--fill-angle Infill angle in degrees (range: 0-90, default: 0)
--start-gcode Load initial gcode from the supplied file. This will overwrite
--fill-pattern Pattern to use to fill non-solid layers (default: rectilinear)
--solid-fill-pattern Pattern to use to fill solid layers (default: rectilinear)
--start-gcode Load initial gcode from the supplied file. This will overwrite
the default command (home all axes [G28]).
--end-gcode Load final gcode from the supplied file. This will overwrite
the default commands (turn off temperature [M104 S0],
@@ -138,6 +142,7 @@ The author is Alessandro Ranellucci (me).
compensating retraction (default: 0)
--retract-before-travel
Only retract before travel moves of this length (default: 2)
--retract-lift Lift Z by the given distance in mm when retracting (default: 0)
Skirt options:
--skirts Number of skirts to draw (default: 1)
@@ -152,3 +157,5 @@ The author is Alessandro Ranellucci (me).
--duplicate-distance Distance in mm between copies (default: 6)